Notices
Evo X Engine / Turbo / Drivetrain Everything from engine builds to the best clutch and flywheel.

Threw Codes C1219, U0428, and C2205

Thread Tools
 
Search this Thread
 
Old Jul 27, 2009 | 05:04 AM
  #1  
DarwinX's Avatar
Thread Starter
Evolved Member
iTrader: (12)
 
Joined: Jan 2009
Posts: 552
Likes: 0
From: Massachusetts
Threw Codes C1219, U0428, and C2205

Last night while making a slow left-hand turn into my street The ASC light came on (ASC off) and I threw the following codes :

C1219 - Lamp ABS Warning Output Circut Open

U0428 - Invaid Data Received From Steering Angle Sensor Module

C2205 - ?

This morning I cleared the codes, and they have not come back as of yet.

I have the stock steering wheel (never touched it), stock suspension, and the only mods I've performed to my Evo with about 7000 miles is in my signature.

Any ideas?


Last edited by DarwinX; Jul 27, 2009 at 12:07 PM.
Reply
Old Aug 7, 2009 | 01:06 PM
  #2  
DarwinX's Avatar
Thread Starter
Evolved Member
iTrader: (12)
 
Joined: Jan 2009
Posts: 552
Likes: 0
From: Massachusetts
Just got the car back from the dealership. They replaced the steering angle sensor module. Seems like that did the trick.

Reply
Old Jul 24, 2011 | 07:33 PM
  #3  
Ghost15's Avatar
Newbie
 
Joined: Oct 2010
Posts: 11
Likes: 0
From: Arlington TX
Hey guys just got these codes too, where is this sensor located? I just installed a set of bc coilovers and still need to get the alignment taken care of, could this be the problem? I appreciate any help possible.
Reply
Old Jul 24, 2011 | 08:38 PM
  #4  
863EvoXlegend's Avatar
Newbie
 
Joined: Jan 2011
Posts: 46
Likes: 0
From: Lakeland, FL
yes alignment can cause the code especially if installed coilovers . sensor should be behind actuall steering wheel but for the most part it can be recalibrated at mitsu when u do alignment
Reply
Old Jul 26, 2011 | 09:05 AM
  #5  
Ghost15's Avatar
Newbie
 
Joined: Oct 2010
Posts: 11
Likes: 0
From: Arlington TX
Thumbs up

Originally Posted by 863EvoXlegend
yes alignment can cause the code especially if installed coilovers . sensor should be behind actuall steering wheel but for the most part it can be recalibrated at mitsu when u do alignment
Awesome, alignment done and problem gone thanks!
Reply
Old Aug 4, 2011 | 08:29 PM
  #6  
smoothevo's Avatar
Evolving Member
iTrader: (3)
 
Joined: Nov 2008
Posts: 440
Likes: 1
From: MD
Just got them as well C1219, U0428 and C2205. Difference for me is they popped up when I turned my car on for the first time today. Also it's been about 10 months since I had an alignment done and it seems fine. No other mods recently.
Reply
Old Aug 6, 2011 | 01:22 PM
  #7  
smoothevo's Avatar
Evolving Member
iTrader: (3)
 
Joined: Nov 2008
Posts: 440
Likes: 1
From: MD
Originally Posted by smoothevo
Just got them as well C1219, U0428 and C2205. Difference for me is they popped up when I turned my car on for the first time today. Also it's been about 10 months since I had an alignment done and it seems fine. No other mods recently.
Popped off the shroud around the steering wheel and jiggled the two sensors that I saw. Resent with AP a couple times and so far everything appears to be OK, no codes.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
drew08
Evo X Engine Management / Tuning Forums
31
Sep 2, 2021 03:59 AM
08EVOVA
Evo X General
2
Apr 15, 2015 11:07 AM
elkazX
Evo X General
8
Feb 11, 2015 02:14 PM
hiboost03
Evo X General
6
Mar 20, 2014 04:29 PM
f7ben
Evo X General
3
Aug 3, 2012 03:56 PM




All times are GMT -7. The time now is 05:35 PM.