I think I have a different problem from the start. P0140...

 

With this part you have to reset the codes and I run a AP with this and no codes what so ever once I cleared it with the ap.

 

If you dont have AP or a code reader, just go to auto zone or advance auto parts and have them clear the codes.

 

this is designed to fix the p2096 cel correct?

 

I have the Vibrant spacer on my AMS TP which I've had installed for the past week now. I started out with the medium spacer. The advice that AMS gave me was to start with the medium spacer and see if you throw a CEL. If you start with the smallest it might not read enough and throw a CEL. If you start with the biggest it might read too much and throw a CEL.

With the medium spacer in I throw a CEL for less than 1 day and it hasn't come back. I figure after I install the AMS DP I will get a tune which will help fix the issue.

 

this can be fixed by a simple ecu reflash.

 

works perfect for me. ive had on over one yr not one cel.

 

Sorry for bumping a dead thread but...

I just got the Vibrant O2 spacer, Opted to install with out the added restrictors... No CEL... Great so far.
However, I have it mounted on a HKS Exhaust, right after the Cat... and its so long its vibrating against the bottom of the car. I believe there is a O2 port on the Cat, but then the wiring is going to run long.

So far not its just a bad design... it could be alot shorter, but does work.

 

when i installed my perrin donwpipe/hfc i also did get a cel but once i got thw vibrant 02 spacer and problem fixed . 2 years later and no problem

 

Vibrant o2 didnt work for me, unfortunately.

 

Vibrant o2 spacer worked for me. I'm running a AMS downpipe & HFC with a Perrin Catback.

 

have a 100cel cat and even with the vibrant spacer using the smallest hole it still throws the codes.

will try an elbow type later when i have time.

 

I have a spacer that I took off a car if anyone wants to give it a try to see if it works. The car I took it off from had the O2 Sensors coded out so I no longer need it.

 

I have one on my Catless KIA haha with the mid spacer no problems. And I was running one on my Catless Evo X with the mid spacer no problems either.