Will a tial bov work with the EtS intake setup? I have stock BOV now but want to spice up that wooooooshhhh

 

Don't have first hand experience with them but from what I have seen would need the fitting to go along with it depending on which style valve you use. I believe the ETS bov hoses are 1.25in so would need to verify the diameter of the valves fitting/flange.. Some have a v band clamp for both ends, some have it only on one end and others have regular flange...

 

Be aware a VTA will cause P0101 with the Tial

 

It will work, im running that exact same setup, i think there was an adapter to make it work though by boomba? I bought my car like this, i'll take a further look and let you know!

 

Also curious on how to run a tial bov. Will be upgrading the turbo over the winter and want to get this out of the way. Running ets intercooler, piping, and intake.

 

I have the ETS Intake, and went with the Tial QRJ (obviously recirc though) when you order they give you the options on how you want the inlet and outlet. I went with hose in and hose out for now but I ordered the v-clamp ends as well for later down the line. Works fine.

 

Yes, it will work you just need the 1.34" Hose fitting on the in and out side of the BOV to make it like a stock replacement BOV.

- Robert

 

Robert knows his stuff.

 

I don’t mean to rehash an old thread but I’ll be purchasing the ets intake as well as the intercooler kit (includes uicp + licp) and am planning on using the tial q bov (not qr). That being said can anyone confirm wether or not the tial q or even the qr with their flange hookup properly with the ets licp and if the return plug correctly fits the return pipe built in to the ets intake ? Thanks in advance fellas