So I recently bought my Evo and it has the gt3576r gen 2.. I was doing shifter bushing today and had to remove the intake to get to them. I noticed that the silicone intake boot to the turbo is hitting the shifter cable and i feel like it restricts some flow. The turbo is a 4” inlet and I have the map 3.5 intake. Is there a better inlet boot out there? Or anyone have any issues? I tried googling but can’t find anyone having an issue….

 

Who makes the 4" silicone inlet that your using?

 

honestly no idea. Came with the car and no markings on it. But it’s a 45degree one and a section hits the shifter cables. Idk if a 90 degree would be able to even go with the intake..

 

I just bought the GTX3076R GEN2 with 4" intake like you. I was planning on using 4" SCAT hose and just have it take whatever shape is needed.

 

have to make sure it can hold the psi tho. I’m mine I need a 4”-3.5 reducer bc intake is a 3.5 map one

 

There is no pressure on the intake side. SCAT hose can take -4psi which would mean there was quite the restrictive air filter. I can keep it 4" without a reducer to the MAF with a custom MAF housing.