View Poll Results: Which FMIC to get?
AMS
136
71.58%
CBRD
21
11.05%
Perrin
33
17.37%
Voters: 190. You may not vote on this poll
Which FMIC?
Thread Starter
Newbie
Joined: Aug 2008
Posts: 80
Likes: 1
From: Socal
Thanks for the referrals! It's hard to go wrong with a 4.0" direct replacement intercooler with our new advanced fin pack design.
We now have more charge rows then any intercooler on the market with a looser internal fin pack to allow for less pressure drop, but more charge rows to keep the temps down. The external fin pack is dense and offset which allows for optimal fin transfer area.
This is the same core we run our 9 sec evolution x, track proven
Thanks!
Michael
We now have more charge rows then any intercooler on the market with a looser internal fin pack to allow for less pressure drop, but more charge rows to keep the temps down. The external fin pack is dense and offset which allows for optimal fin transfer area.
This is the same core we run our 9 sec evolution x, track proven
Thanks!
Michael
Newbie
Joined: Feb 2010
Posts: 61
Likes: 0
From: Torrington, CT
You know both AMS and ETS will make top of the line parts. The difference is you can get the entire ETS intercooler upgrade kit complete with uicp and licp for $900. Or JUST the AMS intercooler for $730, with both IP for a total of around $1300. Why is ETS not even in the poll is my question
Thread Starter
Newbie
Joined: Aug 2008
Posts: 80
Likes: 1
From: Socal
You know both AMS and ETS will make top of the line parts. The difference is you can get the entire ETS intercooler upgrade kit complete with uicp and licp for $900. Or JUST the AMS intercooler for $730, with both IP for a total of around $1300. Why is ETS not even in the poll is my question
Sometimes you can negotiate a small discount from each company as well. Always worth a try. They probably all have about the same $$ in them so they should be able to get close to the same price if given a chance.
I am in the market for one. I had a post earlier about difference in cast or fab end tanks. Micheal from ETS explained it. I will be going ETS, they are cheaper, even with it anodized then the three you listed. I am one for gettin best quality for cheaper price. SAme performance gains and less money is what makes it a win for me. But to each their own. From what you chose, either will be great. Make sure you contact Adam at MAP for deals.
Newbie
Joined: Feb 2010
Posts: 61
Likes: 0
From: Torrington, CT
Thread Starter
Newbie
Joined: Aug 2008
Posts: 80
Likes: 1
From: Socal
ETS Evolution X Intercooler Kit.
Link To Store: http://www.extremeturbosystems.com/p...duct_info.html
There you go!
Michael
Link To Store: http://www.extremeturbosystems.com/p...duct_info.html
There you go!
Michael
to both of you!
