Notices
Evo X General Discuss any generalized technical Evo X related topics that may not fit into the other forums.

disappointing dyno results

Thread Tools
 
Search this Thread
 
Old Aug 25, 2011, 08:53 PM
  #16  
Newbie
Thread Starter
 
evo-griff's Avatar
 
Join Date: Oct 2006
Location: San Francisco
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
AFR was 7.4, is there a way to derive the boost from that? Maybe 8PSI?
Old Aug 25, 2011, 09:02 PM
  #17  
Evolved Member
iTrader: (24)
 
localtoys73's Avatar
 
Join Date: Oct 2008
Location: deltona
Posts: 1,028
Likes: 0
Received 1 Like on 1 Post
ahh No on both of those numbers. Stock boost is around 21 for the X I think.
Old Aug 25, 2011, 09:05 PM
  #18  
Evolved Member
iTrader: (7)
 
BLK_EvIL's Avatar
 
Join Date: Dec 2008
Location: Lakeport
Posts: 538
Received 22 Likes on 19 Posts
what shop tuned you if you dont mind saying. Also you have to consider Cali's finest 91oct is a power killer
Old Aug 25, 2011, 09:31 PM
  #19  
Evolved Member
 
RoMeIX's Avatar
 
Join Date: Jun 2006
Location: Mesa, Az
Posts: 591
Likes: 0
Received 0 Likes on 0 Posts
There are several things to consider here. First, get a boost gauge. It's not safe to be modded and tuned and to have no way of knowing what you are boosting.

There are many factors as to why your numbers may have been lower than what you expected. Was it hotter today than the last time you dyno'd? Were you on the same dyno? There is nearly a 15% difference between mustang and dynojet dynos. There are even sometimes differences between the same kind of dynos that are just at other tuning facilities. Was the boost higher? Lower? This is why you need a boost gauge.

Ultimately there are too many variables to figure out why your numbers don't seem right.
Old Aug 25, 2011, 09:46 PM
  #20  
Evolving Member
iTrader: (5)
 
bayrider's Avatar
 
Join Date: Jun 2004
Location: NORCAL
Posts: 114
Received 0 Likes on 0 Posts
Who tuned your car?
Old Aug 25, 2011, 09:50 PM
  #21  
Evolved Member
iTrader: (31)
 
Spoolin4g63's Avatar
 
Join Date: Dec 2008
Location: Monterey Ca.
Posts: 658
Likes: 0
Received 1 Like on 1 Post
post a graph, and who tuned the car.?
Old Aug 25, 2011, 09:55 PM
  #22  
Evolving Member
 
pikkagtr's Avatar
 
Join Date: May 2007
Location: San Jose
Posts: 106
Likes: 0
Received 0 Likes on 0 Posts
yeah who tuned it and what was the baseline.
dyno #s are for bench racers,
the dyno is a tool to tune and the only thing that matters is the delta
if you baselined at 205whp then it just happens to be a real low reading MD
Old Aug 25, 2011, 10:20 PM
  #23  
Evolving Member
 
HAHAV8's Avatar
 
Join Date: Aug 2010
Location: NY
Posts: 470
Likes: 0
Received 0 Likes on 0 Posts
Well I made 305whp on a low reader MD, and I've seen 340whp on a local DJ. So lets say your 280whp may be 320 or so on a DJ which isn't bad.

Also dyno numbers mean nothing. My car runs like a bat outta hell for 305whp, I clicked off a 7.9@88mph in the 1/8th, and have no doubt my car would run low 12s@112+




All times are GMT -7. The time now is 05:00 PM.