clutch master cylinder
clutch master cylinder
Alright, I have a few questions I've heard that it is good to replace the clutch master cylinder for an after market, so I did replaced my cluth to an act hd pressure plate with a new stock flywheel and at the beggining I noticed that the clutch was engaging at the bottom but after a week or so It started to engage on the very top (almost at the end) and I'm having a hard time on up hills and first. I did purchased the map oem clutch master cylinder but im wondering if that would solve the problem or if theres anything else i could do ?
Thank you
Thank you
http://www.evoxforums.com/forums/showthread.php?t=3347
From what I hear it makes things feel much better.
From what I hear it makes things feel much better.
Pill removal
Gotcha will definitely do that this weekend thanks a lot man ! Appreciate it
http://www.evoxforums.com/forums/showthread.php?t=3347
From what I hear it makes things feel much better.
From what I hear it makes things feel much better.
..
gotcha , will do the pill sometime tomorrow and the master cylinder during the week, hopefully everything turns out good! thanks a lot
Trending Topics
just wondering have you check if your master cylinder is still the the plastic or you got metal version? but ive read some few forums that they had recalls on the plastic and replace it with the metal version
The recall replaces the old plastic with a new updated plastic. Can't go wrong with the CMC upgrade from AMS, MAP or Magnus. When given the option please get the OEM EVO 9 CMC. Don't opt for the aftermarket. You get what you pay for. Do it right the first time.
I can vouch for that. Went through 3 aftermarket CMC's before I decided to go for the OEM Evo IX one.
..






