HELP on installing Blox Vacuum Manifold Kit
#1
Evolving Member
Thread Starter
HELP on installing Blox Vacuum Manifold Kit
trying to organize and fix my boost line so that i can get a more reliable "feed" to my aem meth kit, boost gauge and BOV ...without tapping/teeing everywhere.
so i came across this
http://www.advancespeedshop.com/blox...03-p-7191.html
the Blox Racing Billet Vacuum Manifold Kits
it comes with a 3/8 main feed line and 6 X 1/8 (vacuum) split.
does this thing work on our car?
Where should i tap the 3/8 feed line at to get an accurate vacuum and boost "signal"?
thanks guys
so i came across this
http://www.advancespeedshop.com/blox...03-p-7191.html
the Blox Racing Billet Vacuum Manifold Kits
it comes with a 3/8 main feed line and 6 X 1/8 (vacuum) split.
does this thing work on our car?
Where should i tap the 3/8 feed line at to get an accurate vacuum and boost "signal"?
thanks guys
Thread
Thread Starter
Forum
Replies
Last Post
mrwickd123
Evo X How Tos / Installations
30
Feb 20, 2019 09:29 PM
kungfugirl
Lancer Aftermarket Forced Induction Tech
41
Aug 24, 2008 08:20 PM