When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
[URL="[url=https://flic.kr/p/Ugyzqi][/url][url=https://flic.kr/p/Ugyzqi]DSC_0340[/url] by [url=https://www.flickr.com/photos/143007336@N07/]Dan D[/url], on Flickr"][/ame]
[URL="[url=https://flic.kr/p/Ugyzcc][/url][url=https://flic.kr/p/Ugyzcc]DSC_0322[/url] by [url=https://www.flickr.com/photos/143007336@N07/]Dan D[/url], on Flickr"][/ame]
[URL="[url=https://flic.kr/p/TbFUq9][/url][url=https://flic.kr/p/TbFUq9]DSC_0312[/url] by [url=https://www.flickr.com/photos/143007336@N07/]Dan D[/url], on Flickr"][/ame]
[URL="[url=https://flic.kr/p/UpqUUm][/url][url=https://flic.kr/p/UpqUUm]DSC_0346[/url] by [url=https://www.flickr.com/photos/143007336@N07/]Dan D[/url], on Flickr"][/ame]
[URL="[url=https://flic.kr/p/UpqU7Q][/url][url=https://flic.kr/p/UpqU7Q]DSC_0339[/url] by [url=https://www.flickr.com/photos/143007336@N07/]Dan D[/url], on Flickr"][/ame]
I've been following this thread since January 2009 and we finally have wheels for the wife's 2008.
VMR V710 18 x 9.5 +22
265/35/18 Firestone Firehawk Indy 500s (aka RE003s)
Apexi N1 coil overs @ -1.3 F -1.5 R camber
Nothing rolled
Big shout out to Kelvin at DTM Autobody for the custom teal powder coating, coil over install and many other things
Varrstoen ES6 18x9.5 +22 (10mm spacer on front to clear calipers)
Hankook Ventus S1 Noble2 245/40ZR18
Eibach Pro-Kit / Stock KYB Struts
-1.3 degrees front camber / -2.0 degrees rear camber
No roll, no pull, no rubbing so far
i have t he same setup. i used 3mm spacers to clear brembos in front. im rubbing on deep humps and i have 255/40 tires stretched. will do a fender roll within this week. my question is have u tried fitting 275/35 tires? thanks