evo x camber

Reply Subscribe

Thread Tools

Search this Thread

Nov 15, 2008 | 09:24 AM

evox34

Thread Starter

Newbie

Joined: Oct 2008

Posts: 53

Likes: 0

From: arecibo,p.r.

evo x camber

is to install some eibach spring and I want to know what the factory camber on the front and rear tires, with the factory wheels

Nov 15, 2008 | 12:58 PM

goofygrin

Evolved Member

iTrader: (5)

Joined: May 2008

Posts: 3,125

Likes: 4

From: Frisco, TX

um search?

Front: -1* to -1.5* camber, 0 toe
Rear: -1* camber, .04 toe IN on each side

Nov 16, 2008 | 06:52 AM

evox34

Thread Starter

Newbie

Joined: Oct 2008

Posts: 53

Likes: 0

From: arecibo,p.r.

thanks!!

Nov 18, 2008 | 04:14 PM

Fair

Former Sponsor

Joined: Aug 2008

Posts: 114

Likes: 0

From: Dallas, TX

We were able to max out the front camber at -2.1° with the stock suspension and stock ride height on our EVO X. It still needs more - a LOT more. Look at the camber loss under load...

stock suspension with -2° camber in front = not nearly enough!

Heinous body roll and camber loss. It was a struggle to even break the 1.0g lateral grip mark using Dunlop Star Specs. Grossly soft springs and blah factory dampers, yuck!

We've already got our new EVO X camber-caster plates ready to go on the car, and should have them released very soon.