Is anyone running this wheel/tire setup on their X? 18x10 295/35/18 or 295/30/18 Would like to see pictures.
thanks

 

295/35/18 is waaaaayyyyyy too tall

 

OR 295/30.. Not trying to run stretch like everyone else

 

on a 18x10 even a 275 or 285 will not be stretched, unless you get a narrow tire model.

 

Actually a 275 on a 10 still looks stretched IMO .. Slightly but still there.

 

https://www.evolutionm.net/forums/no...evo-8-9-a.html

Trying to run something like this but on an X. Just wanting to see what offset I could run on the x with this wheel and tire combo 18x10 with 295/30/18

 

Depends on the tire, as I said above.

 

Sure

 

You can run in the +25 range and be fine. My friend has 18x10 +25 konig milligrams and they fit just fine with 27/35r18 re71r's. He has a partially rolled rear fender, and we took out his front fender liners. Although those would fit if we had time to heat them up and push them out of the way. a 285/30 or 295/30 would be fine with a fully rolled rear fender.

 

I run 18x10 +25 with 285/30. Only rear fender rolled and they fit no problem. I would think 295/30 would fit fine as well. Might try that next.