Evo X Sway Bar Endlinks Bolts
#1
Newbie
Thread Starter
Join Date: Feb 2015
Location: In Front Of You
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Evo X Sway Bar Endlinks Bolts
I would like to know if the bolts loosening on aftermarket sway bar links are still an issue?
I would like to run a square spring rate with a stiffer sway in the rear. After reading post after post of the bolts loosening with the aftermarket links, I am considering going with a higher spring rate in the rear than the front to compensate for running the stock sway bars.
I would like to run a square spring rate with a stiffer sway in the rear. After reading post after post of the bolts loosening with the aftermarket links, I am considering going with a higher spring rate in the rear than the front to compensate for running the stock sway bars.
#2
EvoM Guru
iTrader: (1)
Sway bars and springs are not the same thing. They do work together, but stiffer on one is not the same as stiffer on the other.
I've never had an issue with end links loosening up when installed properly.
I've never had an issue with end links loosening up when installed properly.
Thread
Thread Starter
Forum
Replies
Last Post
EvolutionRacing
For Sale/WTB - Engine / Drivetrain / Power
2
Mar 21, 2017 11:01 AM
MisUnderStood
For Sale - Suspension / Brakes / Handling
20
Jan 18, 2016 05:57 PM
deylag
For Sale - Suspension / Brakes / Handling
2
Jul 27, 2011 06:29 PM
.MM
For Sale - Suspension / Brakes / Handling
14
Feb 17, 2007 11:35 AM
Zeus
South Region
1
May 10, 2004 08:49 AM