Spacers needed
Pretty sure any spacer 5mm & beyond should need the extended studs. Years ago i installed H&R 5mm spacers & they came w/the extended studs
Some exacting details here:
The allowances and tolerances specified in the standard assume normal lengths of engagement between male and female threads. The definition of ‘‘normal’’ is spelled out in the specifications, but, typically, it means lengths of engagement ranging from 1.0 to 1.5 times the nominal diameter of the thread. Lengths for fine-pitch threads are alternately given in number of pitches, with a range of 5 to15 being considered normal.
Some exacting details here:
The allowances and tolerances specified in the standard assume normal lengths of engagement between male and female threads. The definition of ‘‘normal’’ is spelled out in the specifications, but, typically, it means lengths of engagement ranging from 1.0 to 1.5 times the nominal diameter of the thread. Lengths for fine-pitch threads are alternately given in number of pitches, with a range of 5 to15 being considered normal.
Last edited by MinusPrevious; Mar 22, 2021 at 02:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post
