Suggestions on what to do next.

Well, I just bought an 10.5 Dual Port Hotside for my turbo, and I was
looking for some suggestions as to what I can do to compliment this
install. Such as suggestions on what to port and polish, port matching or coating
options. Something that's not too expensive, but would yield
noticeable gains.

I plan to stick with the stock turbo for a while and would like to get
all I can out of it. Also be specific as I am a bit of a noob when it comes to Port and Polishing

Suggestions are appreciated.

PS) I also did some searching, and found some answers, but not all...
so I ask the above.

Here are the engine mods I currently have if this helps.

Helix Turbo-Back
Buschur Intake
MBC Flashed by Al (currently)
Megan Racing O2 housing
HKS 264/264 cams

The Rest is Stock. And currently making 325whp.

 

I don't think anything as far as porting/polishing is going to yield any amount of power to justify the cost :\ All will help but all are expensive.

 

Two words: Jet Propulsion.

 

ported/coated stock exhaust manifold. That's it.

ALKYYYYYYYYYY!

 

Free: gut the car (it will feel faster)
$: p/p and coating
$$: meth inj, IX turbo or 20g or WR
$$$: 2.3 stroker, big turbo

 

What's the WR? stand for in $$? I was thinking about the 20g.

 

White Rabbit...pretty much same as 20g - different vendors call them different things...