ok so i got the buschur/wt package and went to start installing it today. first i did the fuel pump. i followed the directions on evomoto.com and everything went smoothly. i started the car and it held idle and every thing was fine. i didnt drive the car but i reved it up, every thing normal. next was the new forge bov. i took out my greddy one and installed the forge one the exact same way. pretty straight forward. 2 hoses and a vac line. dont think i messed that one up. next was the boost gauge. i already had a boost gauge on my turbo timer but i like haveing an actual gauge that is big and easy to see. so i just cut the line that went from my old boost gauge and sliped it over the line that came with my new boost gauge. and i zip tied it to make sure it has a good connection. i blew in the line and got boost and vac so the gauge is working. after all this is installed i went to turn the car on. it started up ok held idle for 5 seconds and then started to die. so i give it some gas and the rpms just continue to drop. car stalls. i do this a few more times but the car wont hold idle. it will just die even if i try to give it gas. i dont know where i went wrong. can anyone help me out?

 

Go back over everything agian you have a leak dude

 

Hmm.. I would go over everything again. Make sure that you did not unplug something by mistake.

 

how much boost and vac did you produce? jk. whats the vac reading wile its trying to idle?

 

like a vac leak or a fuel leak. i will go back and check every thing again. ahh this is frustrating

 

its a vac leak man check all your connections dude

 

definetely sounds like a leak somewhere,i would check the bov first and go from there.