Hey, Im installing my orbital 2 din kit atm and I'm wondering what I do with the MR gauges, I have Defi's ready to put in for the A-pillar, so how to uninstall the stock MR guages and what do I do with the wiring and hoses connected to the guages?


Thanks!

 

i removed my mr gauges and put in stewart warners. All u need to do is ziptie the wires together and place them back in there neatly. U have to pull off all of the air conditioner knobs. There are screws under behind each one of the knobs when u pull them out. Take out those screws....next down where the stock gauges are. there are 2 or 3 screws up under it u have to get down there and look....after that everything should pop out.....any more questions just ask....sorry if that isnt what u were looking for..

 

well mainly im asking what do i do with the vacuum hose for the boost gauge? do i jsut cap it off?

 

Grrr why the hell did this thread get moved to newbie area, its hardly a good place to find informed decisions about removing the gauges.

 

well you may want to tap the line for your new boost gauge (assuming you have one)

otherwise get a golf tee and twist it all the way into the tubing then clamp the tee secure...that's what I did it worked very well as the golf tee is an extremely snug fit