Hey guys,

Just recieved my Kaixen HID Kit (6500K) and I was wondering where you all are mounting your HID ballasts? Could someone hook it up with a picture of where it could/should be mounted? Thanks in advance.

 

I did the driver side up agianst the frame, and the other one under the light like the factory HIDs go. You can find a place its easy!

 

post pictures when you get them installed

 

wish i could, but that would require me taking off my bumper. And Im at work so no time! sorry!

 

How important is it to change the old fuse with a new 20 amp fuse when installing an aftermarket kit? can our stock fuse handle it fine?

 

Bump for pics!

 

getting mine next week. I will let you know how it goes.

 

I never changed the fuse... Didnt know I had too? Mine has worked fine for 6 months...

 

You have to take off the front bumper in order to install HID's?

 

shoot, you have to take the front bumper off just to change bulbs!

 

 

I installed them on the outside of the frame rails...driverside was sideways with wires going toward the back of the car and for the passenger side I mounted it infront of the oil cooler with the wires going up. This conveniently allowed me to hide the wires and not have a lot of slack.

I replaced both 10amp fuses with 20amp (1 for each light).

 

Yep and that also means under trey too. but its worth it!!! As for the fuses why change em??? I would like to know.

 

Thanks for responding to my question. I'm pretty sure I'm going to get one of these HID kits, I just don't know which brand I'm going to get. Thanks again!

 

No Prob, just get the ones that are 6500k or less, it will be brighter. I got the 9000k and they are not as bright as the other ones but they look good!