I just got a flash from ttp engin. and now i need to get a post log review, so how do yo do that using mitsulogger? What are the steps when logging my ecu from driving wise?

this is what ttp wrote and I don' t understand much?

Please follow out instructions of 2500-7000rpms 4th gear 100% tps only.

 

I have a tutorial in my sig .. there's a video that might help explain it.

 

Don't you have to log it when you drive it? He gave me instructions of 2500-7000rpms 4th gear 100% tps only. what does 100% tps means?

 

You can do a 3rd gear if you dont have a place to do a 4th gear pull. That will put up 100+mph. 100% TPS. juts means 100% full throttle. (gas peddle to the floor for the run)

 

I tried to help you out in your other thread also. I'll try to break it down for you.

Once you get your laptop connected with the car on, open up mitsulogger. You will see numbers moving around in the program if its working right. Start driving, make sure the car is warmed up before doing the log. It may help to have someone in the passenger seat to hold the laptop and click the "start" button. Slowly accelerate and shift to 3rd (or 4th if you have a road you can get over 100mph) so that your rpms are around 2000. Click "start logging" in mitsulogger, it will take a second or two to actually start. Then put the pedal to the ground so you can get 100% TPS (TPS = throttle position sensor). Take it up to around 7200 and let off the gas and then click "stop logging". Once you click stop logging it will save a Microsoft Excel file in the folder you have mitsulogger saved. This file is your log that you need to send to your tuner.

This is known as a wide open throttle (WOT) log and is what most people use to check their tunes and make necessary changes. Your tuner will probably send you a new map if the log shows anything that needs to be changed, such as knock.

Let me know if any of this doesn't make sense...

 

i got it guys thank you.