so recently i blew a freeze plug outta water pump so i got another water pump and just earlier the freeze plug blew again so i was wondering how bad of an idea it would be to jb weld the freeze plug in there or epoxy or of some sort

 

sounds like there could be other problems. something has to be causing the plug to blow

 

I wouldn't do that. There is a reason that your blowing out the freeze plug. You probably have a cooling system blockage or something that is causing excess pressure in the system. Have it properly diagnosed and fix it. If you J/B Weld the freeze plug then it the pressure will find the next weakest link to punch through. You might end up with a hole in your radiator. It shouldn't be too diffucult to figure out the problem. Most cooling systems are pretty straight forward. Good luck.

 

well ive been told its a common problem with the 05 and blowing the freeze plug and when i had the radiator our i put the garden hose to it and it flows pretty good so are there any known points in that that could cause the plug to blow like that

 

samething happen to mine...and i dont know why...but just ones

 

yea for me ive only had this new water pump for a week

 

I thing you should get it checked out also... you dont want more problems down the road. If you dont catch it now, it could get worse later.