Ok, I never dealt with them. Hope you like it and take care.

 

Here's mine from RRM. SRI. No problems whatsoever. Great buy!

 

Pumpdog, I agree 100%, love the sound and the little extra go-go it gives the motor!!!

 

pumpdog did you have any installation issues like with the bolts for the MAS?

 

If you are talking about the 4 bolts you need to take off then. Yep, I got 3 bolts off and the fourth ones piece that held it in broke andI had to use a wrench to take it off. Other than that is was simple. Maybe took 15-20 minutes.

 

What did you do concerning the broken piece?

 

just in case you dont want to risk any of the four bolts breaking, make sure you have a vise grip.. it makes the job so much easier. just in case you're still wondering on how to install it, you dont even have to take the MAS off the stock elbow, just take out the stock airbox and work from there. just make sure you disconnect your negative terminal before starting and letting it idle for 15 minutes after install, just like someone already mentioned. after that, drive it hard so you could start breaking it in and so that you could fall in love with the sound it makes.. good luck

 

This reminds me, I've heard of people messing up their airbox pretty bad when removing it, anybody have this happen?

I'm wondering because I may need to put the car back to stock if I sell it and I don't wont the stock pieces breaking.

 

I got my SRI Injen from options auto. and I ve had no problems. Looks good and sounds good

 

Hey RollerPyro, I took mine off and only screwed up the plastic clips that help hold the air funnel from the front onto the top radiator brace. I figured I could either get new from dealer (probably about a buck total) or just use sheet metal screws if I needed to put stock back on.