New to EvoM
Thanks, I will get some pics up after I clean it up. Anyone know a good place to get my car tuned in indiana? I would like to take it to a shop and have it dyno tuned and have all the little bugs worked out of it.
I live right south of you in NKY and It might be a little bit further then you wanted to go but Roberts tuning in louisville KY is a great place. I have had a bunch of my buddies go down there with great success.
Trending Topics
Does anyone local tune on the street? I have the cable and stuff but forwhatever reason I can't get ecuflash to connect. I have tried the unlocker, Change com ports and everything. I can get evoscan working but that's it.
Also, I have a issue with the acd pump. I have installed a newer one, bled it with the pedal wot and no air in the system and still get the light to pop on. I ground pin 1-4 and get codes 82, and 42. 42 is for the tps. I checked that and the percent at idle is 10. I guess from what I have been told it needs to be 13-14percent so I will adjust that.
One more thing, where are the connectors for the wheel speed sensors? I see where they run up under the fender but not sure where they go from there.
Also, I have a issue with the acd pump. I have installed a newer one, bled it with the pedal wot and no air in the system and still get the light to pop on. I ground pin 1-4 and get codes 82, and 42. 42 is for the tps. I checked that and the percent at idle is 10. I guess from what I have been told it needs to be 13-14percent so I will adjust that.
One more thing, where are the connectors for the wheel speed sensors? I see where they run up under the fender but not sure where they go from there.
Thanks. I finally figured out why my car wouldn't connect up to with ecuflash. It was the reflash cable.
Started to check out how to get 2byte load logging, wideband, and and tephra mods like big maps, and all kinds of other things.
Started to check out how to get 2byte load logging, wideband, and and tephra mods like big maps, and all kinds of other things.


