MFQ Time attack evo.
Newbie
Joined: Apr 2007
Posts: 98
Likes: 0
From: So Cal
time to call up Yimi???
What's the splitter made from, aluminum? Looks pretty good. I'd run two of those tie rods to a bumper beam of some sort.
Are you changing the rear wing to something new?
Are you changing the rear wing to something new?
the splitter will hold just fine, This is not my first time making splitters. We are a race shop.
As for the wing, i'm making my own wing. I have been studying all the DTM cars aeros for the last 4 months. 
O ok well good thing to know. I have also found that you do seem to get more power out of q16. However, thats an awesome setup very well put together and great numbers to show for it.
Also just curious between your 4400 and 4600 rpm if you for some reason were pulling timing because I notice the drop in hp then it kinda went up a little before it had a steady taper.
Also just curious between your 4400 and 4600 rpm if you for some reason were pulling timing because I notice the drop in hp then it kinda went up a little before it had a steady taper.
Charlie looks ver good, i am sure this thing will fly with the new set up.
thanks for the info, we will stay in touch
thanks for the info, we will stay in touch
Been really busy finishing our time attack evo, we made a lot for changes this year comparing to last. Almost finish. Here are some pix of the process
CF front end and headlights
After long wait the turbo is here. I have always impress with the fabrication and quality of the welds. "Thank you Extreme Turbo systems"
ETS T4 1.06ar GT35RHTA
CF front end and headlights
After long wait the turbo is here. I have always impress with the fabrication and quality of the welds. "Thank you Extreme Turbo systems"
ETS T4 1.06ar GT35RHTA
Just for reference, the Voltex rear wing set at maxium angle of attack makes more downforce than the Cyber Evo splitter can balance. So the Cyber Evo, with it's underbody and huge splitter don't run the wing at full angle of attack.
Are you building the airfoil, or just the uprights? I'm planning to build a complete wing, including the airfoil later this summer. The real trick is logging dowforce/lift data and making sure the rear wing balances the front splitter. Your splitter is big enough for a good sized rear wing though.
Just for reference, the Voltex rear wing set at maxium angle of attack makes more downforce than the Cyber Evo splitter can balance. So the Cyber Evo, with it's underbody and huge splitter don't run the wing at full angle of attack.
Just for reference, the Voltex rear wing set at maxium angle of attack makes more downforce than the Cyber Evo splitter can balance. So the Cyber Evo, with it's underbody and huge splitter don't run the wing at full angle of attack.
I'm building the uprights/riser/stands and made the side plates. You are completely correct my friend.
if you have any questions pm me, i will do the same. 
about 12.0:1 to 11.8:1.
Last edited by vboy425; May 8, 2009 at 12:40 PM.