Mounting Solutions S-AFC
Evolving Member
Joined: Jan 2004
Posts: 206
Likes: 0
From: Concord
you can use double sided tape to mount the base to the yellow sticker inside your glove box. this makes it somewhat difficult to reach (i just set it and leave it) but it's totally out of sight.
I did the same
Evolved Member
Joined: Dec 2004
Posts: 699
Likes: 0
From: Central MA
mines mounted in the clove box... no need to look at it when its tuned right....
Just looking at the other posts and in one signature i saw a carbon fiber cat back...
ok i might be seeing things but i dont think ive ever heard of a carbon fiber catback.. wouldnt the thing just meld away at such extreme temps... am i missing something here?
Just looking at the other posts and in one signature i saw a carbon fiber cat back...
ok i might be seeing things but i dont think ive ever heard of a carbon fiber catback.. wouldnt the thing just meld away at such extreme temps... am i missing something here?
Last edited by 03BREvo8; Jan 6, 2005 at 02:11 PM.
rexorz
I mounted mine in the sunglass holder. I ran my wires up the A pillar on the passenger. I pulled the plastic trim and ran the wire up alon the other wires that are there and ziptied my afc wires to those. I then pulled down the ceiling a little and ran my wire up over it. I also removed my sunglass holder and cut a little hole for the wire to pass through. The holders tracks will pinch the wire so I had to cut a little hole. Its very minor and you can't even tell its there.
The wiring was real easy. I'll see if I can't take some pics and show it to you tonight
I mounted mine in the sunglass holder. I ran my wires up the A pillar on the passenger. I pulled the plastic trim and ran the wire up alon the other wires that are there and ziptied my afc wires to those. I then pulled down the ceiling a little and ran my wire up over it. I also removed my sunglass holder and cut a little hole for the wire to pass through. The holders tracks will pinch the wire so I had to cut a little hole. Its very minor and you can't even tell its there.
The wiring was real easy. I'll see if I can't take some pics and show it to you tonight
Originally Posted by ldstang50
rexorz
I mounted mine in the sunglass holder. I ran my wires up the A pillar on the passenger. I pulled the plastic trim and ran the wire up alon the other wires that are there and ziptied my afc wires to those. I then pulled down the ceiling a little and ran my wire up over it. I also removed my sunglass holder and cut a little hole for the wire to pass through. The holders tracks will pinch the wire so I had to cut a little hole. Its very minor and you can't even tell its there.
The wiring was real easy. I'll see if I can't take some pics and show it to you tonight
I mounted mine in the sunglass holder. I ran my wires up the A pillar on the passenger. I pulled the plastic trim and ran the wire up alon the other wires that are there and ziptied my afc wires to those. I then pulled down the ceiling a little and ran my wire up over it. I also removed my sunglass holder and cut a little hole for the wire to pass through. The holders tracks will pinch the wire so I had to cut a little hole. Its very minor and you can't even tell its there.
The wiring was real easy. I'll see if I can't take some pics and show it to you tonight
ya i gotta load them on the comp. I won't have time today cause I'm leaving for CT after work today. My grandmother isn't doing so well. But I'll try to do it on sunday when i get back.
Here is where I mounted my afc, I took out my passanger side a-pillar and there is a hole already on that side to drop the wires through. I also ordered a ecu wire extension harness and pre-wired everything so it made for a simple plug and play when I got it into the car. Dont forget you will need to drop the headliner a bit to run the wires and pop the sunglass holder out to send the wires through.