Let's see where everyone put the switch. I'll post my pic as soon as I fill up my CD on my camera.

 

I put mine in the dash light adjuster hole.

 

I am mounting mine today, not sure where. I also ran a small LED to the switch so that I might actually be able to see the numbers! I could just picture having a mudstain (I mean Mustang) pull up to me at a light and I flip to switch to valet mode instead of my alcohol injection map and I get stomped by a Ford. Now that would **** me off. Well worth a $1.00 led.

 

Heres my .02, I had a buddy cut a piece of aluminum and polished it for the 2nd din in the center console underneath the radio. Granted its visible to everyone and a little concerned over people pressing buttons. I also have to install two other switches for my video. When I get it all finished I'll get pics on here.
dave

 

I wouldn't consider mine a "mounting location", but I have mine underneath my ashtray. I only change maps for valet, or security when I travel, so I don't need constant access to it. I would like to see some of the pics on the others that have posted. Definately the one with the led. <--- Nice touch, never thought of that one.

 

I had concidered putting mine inside the coin tray on the back wall. I also plan to put a LED over the top of mine.

 

I got to mount the switch the other day. Here is a pic.

 

Thats exactly where I was planning on putting mine.. right now I have it wedged between the console and the seat until I have some extra time to mount it.

 

Where do you think I got the idea? I have no original thoughts!

 

Lol

 

i have mine inside my ashtray. i cut a hole on the bottom of the tray. its not mounted, but its hidden.

 

What's that under the headunit?

 

The tuner of course.

 

did you have to cut to make the tuner fit?

 

[QUOTE=BSREVOLUTION]did you have to cut to make the tuner fit?[/QUO

Yeah, I figure that I could always buy a new shifter console if I ever wanted to return the car to stock. I was going to buy an A/F guage for the tuner, but the tuner lite does not have an analog output and I wanted to see the display. It actually fits well where it is. You need to trim the console to fit the width of the tuner and cut a hole a little behind the ash tray all the way to the end of the console. I used velcro fabric secured to the tuner and the underside of the lower DIN. Velcro tape does not work, You need to epoxy the velcro to both sides.