Hey guys any suggestions on the settings I should be running with the AVC-R?

Mods: Turbotrix flash, K/N cone air fliter.

Currently running at 1.4 bar with mixed duty.

Would like to have a high boost setting and a gas saver setting. Thanks.

 

turn it off. You have an a, b and off setting. use the off setting for gas mileage. that 1.4 bar could be your b setting and your race gas setting could be your a.

 

What He Said^^^^^^^

 

Whats the maximum psi/bar that I should set with the setup I have right now?

 

Please post the settings on your AVC-R if you have time. Thanks

 

Does anyone have issues setting up the AVC-R? When i set the cylinder to 4(recommended by Apexi) the RPM sensor malfunctions. It displays 230-270 rpm at idle, which is way off. Please post your settings thanks.

 

Your settings should be Cyl = 4 / Spd = 4 & for Throttle the arrow should be pointing up. If that doesn't help check your wiring. Just trying to help.