P2 Dyno

Reply Subscribe

Thread Tools

Search this Thread

Aug 18, 2006 | 05:36 PM

#16

byt

Thread Starter

Evolving Member

iTrader: (8)

Joined: Oct 2003

Posts: 187

Likes: 0

From: Norcal

Quote:

Originally Posted by Jamie@WORKS

The WORKS Brain Flash P2 utilizes stock boost levels (~20PSI). The difference is that our software/hardware will maintain the stock level all the way to the rev limiter without tapering off.

Well, for the most part I suppose. I still experienced a bit of taper but less than stock. My boost gauge indicated a spike to roughly 1.5-1.6 bar and a taper to roughly 1.3-1.35 by redline. Spoke to you guys a few times about it and was told this was normal..

Sep 1, 2006 | 09:21 AM

#17

xtremeIX

Evolving Member

iTrader: (1)

Joined: Jul 2006

Posts: 201

Likes: 0

From: Victorville, CA

Getting P2 dynoed

I wanted to let people know I will be getting my Evo IX tuned on September 22, 2006 which has the following mods:

3" magnaflow (taper removed)
3" test pipe
2.75" downpipe
Injen Intake w/UIC pipes
WORKS P2 Flash

I don't see many dynoed Evo's with the WORKS P2 FLASH so I'm looking forward to seeing the results which I'll post here.