Just thought I'd share my charts from my first dyno session. Currently running Works P2, Tanabe DP, RMR Cat Back, JDM MR DV. Stock cat, intake, and everything else engine related. Oh, and it is a 05 w/ the 10.5 hotside.

The runs were done on Gruppe-S's Mustang Dyno.







What do you guys think?

 

Do you have a before dyno sheet?

 

Sorry this was my first dyno. But for comparison, my friend with a 05 and catback dyno'd 229hp/255tq at the same shop.

 

you did pretty good for a mustang dyno! Here's my baseline (same car, completely stock) for comparison - although the dyno's could be calibrated differently, even though they are both Mustangs.

 

come on man...memory! It's 241.9hp/256tq!

 

Hey I quoted your numbers before the P2! That was after

 

how many kind of dyno out there , and what gear they dyno on evo? thank

 

decent numbers!

 

This was run on a mustang dyno but there are also the dynojets, dyna packs, dyno dynamics, etc out there. I want to say this was run in 3rd gear but I honestly don't remember. You can always give Gruppe-S a call and ask

 

I was thinking of getting works P2, I dynoed 268/261 with only an Espelir catback on a dynojet. Anyone know what kind of gains to expect with the works reflash and a downpipe?

 

Due to variations in the dynos, the numbers will probably vary, but here's an idea of what you can expect: https://www.evolutionm.net/forums/sh...ighlight=WORKS

 

thanks

 

is this with higher boost? or stock boost?

 

I believe peak is still at stock boost but w/ reduced taper from the flash

 

The WORKS Brain Flash P2 utilizes stock boost levels (~20PSI). The difference is that our software/hardware will maintain the stock level all the way to the rev limiter without tapering off.