The stock 05 evo build has begun
Thread Starter
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
nothing new to report on the shorty/head status right now but I did order and have on the way a fuel pressure regulator kit, there is some concern about two pumps running full time heating up the fuel too much so I'm not certain I'll do that...maybe that's a non issue. The real reason is that I want to get back to a normal fuel map. I can tune for twin pumps with a hobbs switch but you end up with a really funky fuel map. I'm going to be pushing the stock ecu/mas to the limit with the next round of mods so I want to get back to a less tedious and time consuming tune.
nothing new to report on the shorty/head status right now but I did order and have on the way a fuel pressure regulator kit, there is some concern about two pumps running full time heating up the fuel too much so I'm not certain I'll do that...maybe that's a non issue. The real reason is that I want to get back to a normal fuel map. I can tune for twin pumps with a hobbs switch but you end up with a really funky fuel map. I'm going to be pushing the stock ecu/mas to the limit with the next round of mods so I want to get back to a less tedious and time consuming tune.
Thread Starter
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
will do, I'm sure theres a few people interested in what that's all about. I run one on my TT Stealth and it's very nice. The BR kit comes with a gauge so I can set the base fuel pressure which I assume is ~ 43psi without vacuum attached, I haven't looked it up yet but pretty much every boosted mitsu is the same.
Thread Starter
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
did a little top speed run in the evo today 
Time trial 2 video is up http://www.racevideoforums.com/forum...-coverage.html

Time trial 2 video is up http://www.racevideoforums.com/forum...-coverage.html
Thread Starter
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
the last two videos have been added, they are a the end of the time trials and then the dsm & evo eliminator classes...whew it's a lot of work editing 2 hours of solid race footage but I wanted to make sure we got some excellent footage to show people why they need to be there next year.
http://www.racevideoforums.com/forum...-coverage.html
http://www.racevideoforums.com/forum...-coverage.html
Thread Starter
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
a few new things.
had to back track on the FPR..Buschur doesn't have the parts readily available to put it together for me so I'll have to look around for another solution elsewhere.
They did tell me my engine/head is shipping out next week so that's good and the AEM 5 bar pressure sensor is coming too.
A new set of slicks have arrived, haven't mounted or tested them yet but maybe this weekend.
I ordered a new turbo too...I can't say what it is yet as it's a bit hush hush but it's bigger than a 37R
should be about as laggy but more power at high rpm.
so the HTA 35R turbo + 02 housing is for sale. I'm keeping the header/wastegate/fan/downpipe 1500 or best offer and I can't take it off until the new one arrives since it's my daily driver.
had to back track on the FPR..Buschur doesn't have the parts readily available to put it together for me so I'll have to look around for another solution elsewhere.
They did tell me my engine/head is shipping out next week so that's good and the AEM 5 bar pressure sensor is coming too.
A new set of slicks have arrived, haven't mounted or tested them yet but maybe this weekend.
I ordered a new turbo too...I can't say what it is yet as it's a bit hush hush but it's bigger than a 37R
should be about as laggy but more power at high rpm.so the HTA 35R turbo + 02 housing is for sale. I'm keeping the header/wastegate/fan/downpipe 1500 or best offer and I can't take it off until the new one arrives since it's my daily driver.
Last edited by Mellon Racing; Aug 29, 2008 at 12:49 PM.
Thread Starter
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
yes for now, I believe it'll be fine with my launch technique which is to lean on the clutch, get the car rolling then let the clutch out aggressively. That technique has allowed my stock transfer case/axles to survive in my 700awhp TT Stealth whereas other guys that dump the clutch explode gears out of the bellhousing and transfer case etc...and continually have to replace components.


