aem uego cant log with evoscan, need help
Nov 30, 2007, 02:37 PM
#1
Evolving Member
Thread Starter
iTrader: (6)
Join Date: Dec 2006
Location: Dublin,Oh
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
aem uego cant log with evoscan, need help
setup:
aem uego
black wire to body ground and to serial cable
blue wire to serial cable
Serial cable set up
rj 45 cable cut and soidler to aem out puts, shared ground with body
rj 45 then goes to a rj 45 - 9 pin serial adpater then to a serial to usb adapter
usb - serial adpater is a iogear
cant log wideband at all im running vista on my laptop,
any input?
aem uego
black wire to body ground and to serial cable
blue wire to serial cable
Serial cable set up
rj 45 cable cut and soidler to aem out puts, shared ground with body
rj 45 then goes to a rj 45 - 9 pin serial adpater then to a serial to usb adapter
usb - serial adpater is a iogear
cant log wideband at all im running vista on my laptop,
any input?
Dec 5, 2007, 04:50 PM
#4
Newbie
iTrader: (2)
Join Date: Mar 2006
Location: Spokane, WA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
mine wouldn't log at first.. I had to make sure I had the most recent drivers for the USB adapter.. (i am using the one from radioshack) and then I rebooted my computer with the USB attached.. it found it and I was logging in no time.
I have mine permanently hooked up to usb jacks where the ashtray used to be.. just plug in USB and log away!
I have mine permanently hooked up to usb jacks where the ashtray used to be.. just plug in USB and log away!
Dec 6, 2007, 08:52 PM
#5
Evolving Member
Thread Starter
iTrader: (6)
Join Date: Dec 2006
Location: Dublin,Oh
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
you have vista,
comms were set
comms were set
mine wouldn't log at first.. I had to make sure I had the most recent drivers for the USB adapter.. (i am using the one from radioshack) and then I rebooted my computer with the USB attached.. it found it and I was logging in no time.
I have mine permanently hooked up to usb jacks where the ashtray used to be.. just plug in USB and log away!
I have mine permanently hooked up to usb jacks where the ashtray used to be.. just plug in USB and log away!
Thread
Thread Starter
Forum
Replies
Last Post
tscompusa
ECU Flash
1
Nov 5, 2015 05:24 AM
HaVoC RR
Evo Engine / Turbo / Drivetrain
10
Feb 19, 2011 11:19 AM
