I just got an lc1 with xd16 gauge so i can get my car tune and when every thing was hooked up the gauge doesnt read the air fuel rite but when connected to the laptop it does, i recalibrate the o2 sensor like 5 times but no luck...so if anyone have or had this problem please help.

 

that wideband has major problems, I hate the thing. Half of them dont work right out of the box

 

Tell me about it , now im getting to the point of taking it off my car and sell it and get me the aem one

 

Common people nobody else have encountered this problem, i really like this wideband but if cant make it work at least i will try to fix the problem before i sell it.

 

Have you made sure you went through your wiring ? Did you install the led status light ?

If you didnt it might be a good idea for you to install it. Its very useful at telling what its doing. I have been running the lc-1 for about 2-3 years now. My first I installed was working fine for a few months and then stopped working. So I contacted where I bought it and they sent me a new one and dealt with Innovate themselves.

So about 2 weeks ago my second lc-1 just stopped working on me again. i bought a new sensor hoping that was it but it wasnt. So I called up Innovate after checking all my wiring and they had me fill out a form and send it to them and they test it and send out a new one.

So all in all it sucks that they have problems with them but the programming and logging capabilities are great. I tune my own car and depend heavily on my wideband seeing I tune for 12.0's on spool and 11.5 right to redline. So my tune is a little more aggresive so I trust that my lc-1 is giving me accurate readings which it always has and never have had to re-calibrate it.

 

My only issue (not on an evo) is that it sometimes takes a little while for my wideband to start reading at all which I find strange but it doesn't bother me.

 

If the LT is reading correctly, it most likely could be the gauge. Send it back to them. They'll resolve the problem.

 

add me in the list.
Lm-1 with gauge!!!
Innovate sucks and nobody from them answered my emails.

 

ur better off staying with wat you got dude. aem read all off and there not good. u sure u got it wired up right? or what about your o2 sensor??

 

I had the LC-1 XD-16 combo and I would get random E-2 errors then it kept flashing that and wouldn't reset. Its a PITA. Orderd an AEM......only knock on it I've hear of is the fact that it doesn't do realtime data logging (Thats what a serial port is for on a laptop)