Notices
General Engine Management / Tuning Forum Discuss general EMS tuning concepts that do not pertain to a specfic brand or product.

Service engine code, but not connecting to obd reader

Thread Tools
 
Search this Thread
 
Old Jun 29, 2009 | 01:46 PM
  #1  
tonykart125's Avatar
Thread Starter
Evolving Member
 
Joined: May 2007
Posts: 135
Likes: 0
From: NJ
Service engine code, but not connecting to obd reader

I am throwing the service engine light. I just picked up my car on friday and the light came on today, 500 miles later and it has an Intake, catback, BOV.

It is an evo 9.

I went to autozone for the readout and they tried two different readers and neither one could get a connection with the car.

Any suggestions are greatly appreciated.
Reply
Old Jul 26, 2009 | 08:45 PM
  #2  
mitsumanny's Avatar
Evolving Member
iTrader: (5)
 
Joined: Jan 2007
Posts: 208
Likes: 0
From: NUNYA
I'd be really interested to hear what caused this issue. Please let me know what you find out.
Reply
Old Jul 27, 2009 | 09:36 AM
  #3  
west_minist's Avatar
Newbie
 
Joined: Feb 2006
Posts: 23
Likes: 0
From: Caribbean
I have this same problem here:- https://www.evolutionm.net/forums/ev...tics-evo9.html

It was access once and then nothing.
Reply
Old Jul 29, 2009 | 05:53 PM
  #4  
generalu's Avatar
Newbie
 
Joined: Jul 2009
Posts: 51
Likes: 0
From: Southern California
Did you check the condition of your ecu pins? Do you know if the previous owner swapped out the ecu? Try to narrow down your problem. Good luck.
Reply




All times are GMT -7. The time now is 11:46 PM.