Does anyone know what is the highest I can REV to with a TOMEI 2.2L Stroker Kit with TOMEI Poncams, Valve Springs, and Retainers.

 

Anyone knows?

 

Perhaps contact TOMEI?

 

I would just keep revving it untill it stops then thats as high as it will rev

 

I am no expert but that sounds stroked not destroked so would assume rev to 8k at most, some push 2.3's or 2.25's to 8500 but rare.

 

I would not rev a 2.2 past 8500

 

i plan on revvin my 2.2 to about 8300 =]

 

You are right, it is stroked. They use the stock block with their own custom crank. Just like JUN, Cosworth, etc..

 

I have broken 2 tomei 2.2 cranks. Be carefull as I was only at 7500 rpm max cutout.
Make sure you remove the balance shafts. The standard oil pump gets upset at anything over 8000 rpm also. Better to run standard turbo on higher boost and less revs. This way you get incredible torque. Hauls **** from 1500rpm. I still made 270kwts at 7000rpm

 

https://www.evolutionm.net/forums/sh...85#post4842485