0-5 Volt input Evo 7 ECU
Thread Starter
Newbie
Joined: Mar 2015
Posts: 93
Likes: 1
From: Perth, Western Australia
0-5 Volt input Evo 7 ECU
Hi guys
I've got an Evo 7 ECU running the V5 Tephra 90550001 ROM, and I have a PLX wideband with a 0-5V output. I also have Evoscan and an openport 2.0. What pin can I connect my wideband's 0-5V output to, that will allow me to log it in Evoscan? Im not using the ACD/AYC pin (but dont know what the input range is for that). The car is a 95 Lancer GSR, so it doesnt use a lot of the sensors, eg rear 02.
Any help?
I've got an Evo 7 ECU running the V5 Tephra 90550001 ROM, and I have a PLX wideband with a 0-5V output. I also have Evoscan and an openport 2.0. What pin can I connect my wideband's 0-5V output to, that will allow me to log it in Evoscan? Im not using the ACD/AYC pin (but dont know what the input range is for that). The car is a 95 Lancer GSR, so it doesnt use a lot of the sensors, eg rear 02.
Any help?
Thread
Thread Starter
Forum
Replies
Last Post
Koroshiya
Evo X Electrical / Audio / Security
12
Jun 6, 2017 10:38 AM
FS[MidWest]: Evo Stock Gauges (vacuum, oil temp, Volt)
et98cav
For Sale - Interior / Exterior / Sound / Styling
1
May 11, 2015 03:44 PM
batty200
General Engine Management / Tuning Forum
6
Apr 15, 2012 09:58 PM
tonyboy
Evo X Engine Management / Tuning Forums
2
Sep 6, 2011 12:35 PM