Hey guys, have installed 272 camshafts and bigger turbo etc into my evo 6 along with a new link g4+ ecu

i have loaded the base tune onto the ecu and set everything up, mechanical timing looks good but am wondering about the ecu timing/ base timing setup.
basically when i crank the car over it doesnt want to fire and is hitting like a deadspot or a wall if that makes sense while cranking like something is stopping it from turning for a second then it cranks again? Have checked the cam angle sensor and its in the right way

Have attached a vid - any ideas?

 

Try this (evo 6 Tuned ROM) as base

 

Have you checked if the spark plugs aren't wet of gas? It looks like car is flooded