Notices
General Engine Management / Tuning Forum Discuss general EMS tuning concepts that do not pertain to a specfic brand or product.

Could some post Datalog with MAP sensor data ?

Old Sep 13, 2004 | 11:09 AM
  #1  
maikonkun's Avatar
Thread Starter
Newbie
 
Joined: Jun 2004
Posts: 47
Likes: 0
Could some post Datalog with MAP sensor data ?

As per the title, I'd really appreciate it if anyone with the external MAP sensor could post a datalog run showing the MAP sensor data.

TIA
Reply
Old Sep 13, 2004 | 06:17 PM
  #2  
MalibuJack's Avatar
EvoM Guru
20 Year Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 10,572
Likes: 14
From: Royse City, TX
I posted some logs from my runs (or at least snapshots) that show my MAP sensor.
Reply
Old Sep 13, 2004 | 09:05 PM
  #3  
maikonkun's Avatar
Thread Starter
Newbie
 
Joined: Jun 2004
Posts: 47
Likes: 0
Originally Posted by MalibuJack
I posted some logs from my runs (or at least snapshots) that show my MAP sensor.
I think I found the jpg snapshots showing plots of boost against timing etc, but I am really after the raw utec data from a third or 4th gear WOT pull.

I did a several searches and in particular on psia and psig, but the only thing i found was a short utec log you posted at :

https://www.evolutionm.net/forums/sh...ad.php?t=94938


But thanks for the reply.

Would anyone else like to post or send me a log ??
Reply
Old Sep 13, 2004 | 09:15 PM
  #4  
MalibuJack's Avatar
EvoM Guru
20 Year Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 10,572
Likes: 14
From: Royse City, TX
What in particular are you looking for? calibration information? Or the difference in PSIG and PSIA? Its easy enough to build and install your own sensor that you can get this info yourself.
Reply
Old Sep 14, 2004 | 07:24 AM
  #5  
maikonkun's Avatar
Thread Starter
Newbie
 
Joined: Jun 2004
Posts: 47
Likes: 0
Originally Posted by MalibuJack
What in particular are you looking for? calibration information? Or the difference in PSIG and PSIA? Its easy enough to build and install your own sensor that you can get this info yourself.
I am hoping someone would post a "shift 1 data log " of a 3rd or 4th gear WOT run.

In the link I referenced you posted a bit of data :

Data1

, , , ,Load,Knock, , , Mod, Mod, , Mod, WB
RPM, MAP, MAF,TPS,Site,Count, Ign#1, Inj#1, Ign, Fuel,Boost, MAF, AFR
, psig, Hz, % , , , deg , duty , deg, % ,(OL) , Hz,
2041, -8.6, 81, 12, 00, 00, +32.8, 5.0,ECU. , +0.0,ECU. , 84, 14.74
2022, -8.6, 83, 12, 00, 00, +33.0, 4.5,ECU. , +0.0,ECU. , 79, 14.61
2022, -8.6, 73, 11, 00, 00, +32.6, 3.7,ECU. , +0.0,ECU. , 72, 14.65
2004, -8.8, 67, 10, 00, 00, +31.5, 3.8,ECU. , +0.0,ECU. , 62, 14.61
1996, -9.0, 62, 10, 00, 00, +31.5, 3.7,ECU. , +0.0,ECU. , 61, 14.53
1987, -9.4, 58, 9, 00, 00, +31.5, 2.5,ECU. , +0.0,ECU. , 56, 14.58

but this is not a full run.

I talked about psig and psia, because I thought that would be the best way to find any datalogs posted to this forum which included external MAP data. Unfortunately the above snippet is the only thing I found.


I have made some runs with the 3 bar sensor, but I would like to compare to someone else's just for comparisons sake.

Any takers ?
Reply
Old Sep 14, 2004 | 10:09 AM
  #6  
MalibuJack's Avatar
EvoM Guru
20 Year Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 10,572
Likes: 14
From: Royse City, TX
I think alot of the data was posted as attachments because some of it is large..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Clipse3GT
Evo X Engine Management / Tuning Forums
2
Apr 8, 2009 07:26 PM
Import Junky
ECU Flash
15
Jan 2, 2009 09:28 PM
broddey
ECU Flash
10
Feb 18, 2008 02:06 PM
bvdawg13
ECU Flash
6
Dec 28, 2006 01:13 PM
RichJ
Evo Engine / Turbo / Drivetrain
20
Jan 5, 2004 09:43 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 06:46 AM.