I have '03 Lancer OZ Rally and I was wondering where I can get a stock eclipse turbo and piping but not the engine? I work at a Mitsubishi dealership but they are askin $1200 for it, I told them they can kiss my ***, lol . If anyone knows help me out please.

 

do you have a turbo manifold already? the stock eclipse piping may be useless if you dont know where your turbo is going to be positioned . and your obviously not going to be using the eclipse's turbo manifold.. at least not without some modification..

 

Yea i know i need to get the manifold, it's kinda hard to find it for my car though and also i need an exhaust but they run for $500 and i don't want to pay that much so if anybody know where i can get one for a good price then let me know.

 

If u could get a full 2.5"-3" mandrel turbo back exhaust for $500 you'd be getting a nice deal

 

Well thank you. I have 3" madrel t-b ss exhaust for 400.

 

Yea thats a nice deal, custom right?
Mine came to just over $500 for 3" SS mandrel w/ highflow cat/res

 

Thats the problem its not the turbo-back it's the Greddy Evo 2 Cat-back. The parts that i want for my car are either too expensive or hard to find.

 

just a question why did you guys go 3 inch .. 2.5 is plenty .. if i put a 3 inch on my car i could not imagine how much torque i would lose... just my 2 cents

 

the reason for 3"- turbo, standalone ecu, injectors, fuel rail/pump, TB, etc.....

I wanted to make an exhaust that would not be restrictive up to roughly 16psi (once internals are installed)

 

gotcha, i am stage 2 turbo my downpipe is 3 and works down to 2.5 and it stays 2.5 all the way back..

i agree with your decision for 3 since you are looking for high boost levels, but for someone that is turbo pushing 5-10 psi there will be a definite loss in torque

 

For the type thongs you want for ur car bro ur gonna have to fork out some cash remember we dont drive hinda civics where parts are a dime a dozen

 

You can use the eclipse turbo you would just have to find a manifold. Your best bet would probably be to find a manifold for the stock turbo for an eclipse off of e-bay, then have a new flange welded on. A mani would be ~150, the flange ~100, and teh welding ~100. Or just have a log manifold made for your turbo.

 

Just drop a Evo turbo!

I got a 2005 Evo turbo w/ 10.5 hotside, 02 housing all ready. All you need to do is get a Manifold to be able and apply it to the lancer. I was going to put it in mine but I got the RRM kit.

shoot me a PM if you want it, i'll give you a good price for it!

 

i have custom manifold for sale!!!
i will have another manifold coming too!!
both of them will be up for sale but i am going to sell only one!!