I have the rrm nonIC turbo kit right now, but want to get a FMIC. If i get it ill be able to boost one or two more lbs, but will i also be getting more hp per lb?

 

yes you will gain more HP per lb.

I noticed a large increase on my car.

 

yes, you will see some more hp/tq per psi you add when you upgrade to the FMIC. Guru_Del upgraded and i believe is at like 13hp per psi or something crazy like that.

 

uppp responded .2 seconds before me there vince

 

so if i turn up the boost to 8 that will be 8x13=104whp sounds a little high to me. that makes it 102stock+104=206. Boe has stage 2 and lots of other stuff and is only getting 233whp.

 

im not sure, but i think vince has like just under or right at 200, i cant find his thread that he made with the dyno or his car with the IC

 

8*13=104 yes, whp = no... thats 104hp in general, probably to crank.. only expect to see about 80-90 to the wheels

 

vince dynoed his at 193whp at 6.8psi i think so that comes out to over 13whp/psi. vince do you know how many whp you wre getting per lb b4 the IC?

 

Im pretty sure - not that im speaking for vince - but i saw that ROCK made a post just recently that said like the non-IC kit ran like 170 or 180whp i believe, dont quote me, but im pretty sure thats what i read.

 

See NTran999's dyno sheet.