Community Tephra Tweaking
Mar 23, 2011, 01:36 PM
#902
drove like crap 
couldnt even get down my street it kept going full lean and sputtering when i would push on the throttle but idle was fine and when i raised the kpa to load any higher it would idle richer and still didnt fix the lean accel but didnt get any codes this time only when first put the harness on before i flashed it so yea called rs and he didnt answer so i had to flash my old one back just to get back to my house driveway lol
couldnt even get down my street it kept going full lean and sputtering when i would push on the throttle but idle was fine and when i raised the kpa to load any higher it would idle richer and still didnt fix the lean accel but didnt get any codes this time only when first put the harness on before i flashed it so yea called rs and he didnt answer so i had to flash my old one back just to get back to my house driveway lol
Last edited by link62; Mar 23, 2011 at 01:49 PM.
Mar 23, 2011, 02:26 PM
#903
Found something like a circuit check in the code hopefully this fixes the 403 problem.
<table name="Evap Circuit Test Bypass (Stock 0x4A0B -> NOP 0x9)" address="2A740" type="1D" level="1" scaling="Hex16"/>
This may have a VERY dramatic effect on the car this sub is HUGE!
please be cautious when testing
<table name="Evap Circuit Test Bypass (Stock 0x4A0B -> NOP 0x9)" address="2A740" type="1D" level="1" scaling="Hex16"/>
This may have a VERY dramatic effect on the car this sub is HUGE!
please be cautious when testing
Last edited by RoadSpike; Mar 23, 2011 at 02:57 PM.
Mar 23, 2011, 02:27 PM
#904
drove like crap couldnt even get down my street it kept going full lean and sputtering when i would push on the throttle but idle was fine and when i raised the kpa to load any higher it would idle richer and still didnt fix the lean accel but didnt get any codes this time only when first put the harness on before i flashed it so yea called rs and he didnt answer so i had to flash my old one back just to get back to my house driveway lol
couldnt even get down my street it kept going full lean and sputtering when i would push on the throttle but idle was fine and when i raised the kpa to load any higher it would idle richer and still didnt fix the lean accel but didnt get any codes this time only when first put the harness on before i flashed it so yea called rs and he didnt answer so i had to flash my old one back just to get back to my house driveway lol
Mar 23, 2011, 02:59 PM
#905
Evolved Member
iTrader: (3)
Join Date: Jun 2010
Location: Boston MA
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Found something like a circuit check in the code hopefully this fixes the 403 problem.
<table name="Evap Circuit Test Bypass (Stock 0x4A0B -> NOP 0x9)" address="2A740" type="1D" level="1" scaling="Hex16"/>
This may have a VERY dramatic effect on the car this sub is HUGE!
please be cautious when testing
<table name="Evap Circuit Test Bypass (Stock 0x4A0B -> NOP 0x9)" address="2A740" type="1D" level="1" scaling="Hex16"/>
This may have a VERY dramatic effect on the car this sub is HUGE!
please be cautious when testing
Mar 23, 2011, 04:41 PM
#907
Evolved Member
iTrader: (18)
Join Date: May 2004
Location: California
Posts: 2,069
Likes: 0
Received 0 Likes
on
0 Posts
Found something like a circuit check in the code hopefully this fixes the 403 problem.
<table name="Evap Circuit Test Bypass (Stock 0x4A0B -> NOP 0x9)" address="2A740" type="1D" level="1" scaling="Hex16"/>
This may have a VERY dramatic effect on the car this sub is HUGE!
please be cautious when testing
<table name="Evap Circuit Test Bypass (Stock 0x4A0B -> NOP 0x9)" address="2A740" type="1D" level="1" scaling="Hex16"/>
This may have a VERY dramatic effect on the car this sub is HUGE!
please be cautious when testing
fixing my huge pre turbo exhaust leak
Also, that XML for the Evap Bypass, seems to be working great, no CEL in two days 
Have to IAT sensor in, just waiting for time to wire it to the ECU!