Notices
Lancer Engine Tech Discuss specs/changes to the engine from cams to fully balanced and blueprinted engines!

My new Exaust with pic =)

Old May 12, 2002 | 08:38 AM
  #1  
Link286XT's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Nov 2001
Posts: 320
Likes: 0
From: CA
My new Exaust with pic =)

Hey check out my new exaust, it has a very deep tone very intimading
i also noticed a slight torque gain from 1st to 2nd

Link
Attached Thumbnails My new Exaust with pic =)-dtmexaust2.jpg  
Reply
Old May 12, 2002 | 09:24 AM
  #2  
DaTenshi's Avatar
Evolving Member
 
Joined: Mar 2002
Posts: 336
Likes: 0
From: CT
not a fan of dual tip exhaust on the lancer but if its your thing then go for it
Reply
Old May 12, 2002 | 09:25 AM
  #3  
Boni's Avatar
Evolving Member
iTrader: (3)
 
Joined: Feb 2002
Posts: 411
Likes: 0
From: Ontario, CA.
what kind of exhaust is that ? im not really feelin the dual pipe but dont matter as long as u like it. get the RRM high flow cat, it will open it up alot.
Reply
Old May 12, 2002 | 09:48 AM
  #4  
Link286XT's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Nov 2001
Posts: 320
Likes: 0
From: CA
OBX Dual DTM Tip
got it off e-bay for $55, normal price $200

Link
Reply
Old May 12, 2002 | 10:06 AM
  #5  
HobieKopek's Avatar
EvoM Staff Alumni
20 Year Member
iTrader: (8)
 
Joined: Feb 2002
Posts: 7,701
Likes: 0
From: Long Island
I don't like euro exhausts. Especially with the stock cutout still on the bumper. I stand by my philosophy though...if the car owner likes it, then more power to em. (no pun intended).
Reply
Old May 12, 2002 | 10:10 AM
  #6  
pjal84's Avatar
Evolved Member
 
Joined: Dec 2001
Posts: 2,722
Likes: 0
From: Up to 80 miles north of Gilroy
Sticks out a bit to far and I don't like the twin pipes with a stock cut out. How low does the exhaust sit from the bumper? I'd be wary when you lower it...
Reply
Old May 12, 2002 | 10:43 AM
  #7  
2wdSQL's Avatar
Evolved Member
 
Joined: Feb 2002
Posts: 689
Likes: 0
From: VA
The dual outlet would look better if you modify your exhaust outlet and fit the tips into it. Also how large is the pipe diameter of that exhaust?
Reply
Old May 12, 2002 | 10:52 AM
  #8  
visualkei72's Avatar
Evolving Member
 
Joined: Apr 2002
Posts: 102
Likes: 0
From: Los Angeles, CA
eh?

Uhh...Dude, good job with the exhaust, looks nice and all, but uhh....
DID YOU REALIZE THERE IS A BUMPER FITTING FOR ONE EXHAUST PIPE?!
It looks like you forgot there was only a cut-out for one.
Don't mean to bash, but get a new bumper piece...quick.

- Kei
Reply
Old May 12, 2002 | 12:28 PM
  #9  
EvoSouL's Avatar
Evolving Member
 
Joined: Mar 2002
Posts: 366
Likes: 0
From: SO.CAL.
it's all good

hey if you like it that's fine...

However, it just doesn't look right on that lancer bumper
Reply
Old May 15, 2002 | 12:30 AM
  #10  
Pimpson's Avatar
Evolved Member
 
Joined: Apr 2002
Posts: 662
Likes: 0
From: Kilorado
like everyone else said, it looks off with the standard exhaust outlet. hmm, twin tips are o.k. but not for this car IMO. I want to run an h-pipe and get dual tips on the opposite sides of the car. two 2.25" str8 pipes would be hella phat!!
Reply
Old May 17, 2002 | 01:49 AM
  #11  
DEVOTED's Avatar
Evolving Member
iTrader: (1)
 
Joined: Feb 2002
Posts: 113
Likes: 0
From: Southern CA
I think if you rotated the exahust 90 degrees it would be cool! I don't think anyone has set it up like that before.
Reply
Old May 17, 2002 | 02:02 AM
  #12  
ez4me2c3d's Avatar
Evolving Member
 
Joined: Mar 2002
Posts: 298
Likes: 0
From: Ellsworth AFB, SD
damn! you all are a bunch of d!ck$. im sure he knows there is only a cut-out for one pipe. im sure he knows that it doesnt "match" having dual tips and a single cut-out. he was just happy about his new pipe and wanted to share.

BTW, you shouldn't have gone with dual tips link IMO.
Reply
Old May 17, 2002 | 04:03 AM
  #13  
HobieKopek's Avatar
EvoM Staff Alumni
20 Year Member
iTrader: (8)
 
Joined: Feb 2002
Posts: 7,701
Likes: 0
From: Long Island
Originally posted by DEVOTED
I think if you rotated the exahust 90 degrees it would be cool! I don't think anyone has set it up like that before.
I think you mean 180 degrees. Euro style exhausts face up, not down. He did it right.

Originally posted by ez4me2c3d
damn! you all are a bunch of d!ck$. im sure he knows there is only a cut-out for one pipe. im sure he knows that it doesnt "match" having dual tips and a single cut-out. he was just happy about his new pipe and wanted to share.

BTW, you shouldn't have gone with dual tips link IMO.
As far as the criticisms, at least we're somewhat constructive, very honest and (for the most part) not brutal. I'm not gonna lie, if I saw that on the road I'd chuckle to myself if not laugh out loud. And again, if he's happy with it then great. That's what really matters no matter how any of us react.
Reply
Old May 17, 2002 | 05:01 AM
  #14  
yellowlancerOz's Avatar
Evolving Member
iTrader: (1)
 
Joined: Apr 2002
Posts: 470
Likes: 0
From: Tampa
sorry not my style but hey if that is what you like
Reply
Old May 17, 2002 | 05:16 AM
  #15  
sblvro's Avatar
EvoM Community Team Leader
iTrader: (2)
 
Joined: Sep 2001
Posts: 3,135
Likes: 6
From: chicago, michigan, arkansas
have it come out on the side, like a dragster?
Reply

Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:37 AM.