HOW TO: Install ebay fog lights
#16
Evolved Member
iTrader: (2)
dang thats alot of work for install of fog lights..... i got mine off amazon and bought a piaa harness cause the one tht came with my kitt was bad quality.... i basicly attached lights to bumper... instld quick disconnects their to make it easy to remove, ran wireing along the crashbar and zip tied mine to it behind so u cant see it.. power was tied to battery fuse is hiding beside the btry tray, cant see it and switch wire is running along fender and into the driver side door gromet where it goes inside.. i put my switch next to the dimmer switch and i had to run an adit power wire for the switch itself...
kinda easy to tap into cig lighter.. all my wires are nowhere visable no need to tap into fuse box like u did
kinda easy to tap into cig lighter.. all my wires are nowhere visable no need to tap into fuse box like u did
#18
was just wondering I got a lancer it didn't come with fog lights therefor i dont believe it would have a button to turn on. I want to install but how would i get them to go on and off?
#19
Most of the kits come with button where you can install right next to your steering wheel.
#23
just installed my fog lights thanks for the help made it easy.. but my problem is now that everything was installed n it worked so i turned my fogs on took a pic and shut them off. I finished cleaning up everything went inside about 30 mins later i had to go so i was gonna check out my fogs see how they were looking.. bottom line my fogs didnt turn on. so after i came back i checked everything repeated the steps fuse was good etc etc. what could i of did wrong? btw my switch for fog lights lights up so i wouldnt think that the fuse for that is bad or anything
#24
just installed my fog lights thanks for the help made it easy.. but my problem is now that everything was installed n it worked so i turned my fogs on took a pic and shut them off. I finished cleaning up everything went inside about 30 mins later i had to go so i was gonna check out my fogs see how they were looking.. bottom line my fogs didnt turn on. so after i came back i checked everything repeated the steps fuse was good etc etc. what could i of did wrong? btw my switch for fog lights lights up so i wouldnt think that the fuse for that is bad or anything
#25
just installed my fog lights thanks for the help made it easy.. but my problem is now that everything was installed n it worked so i turned my fogs on took a pic and shut them off. I finished cleaning up everything went inside about 30 mins later i had to go so i was gonna check out my fogs see how they were looking.. bottom line my fogs didnt turn on. so after i came back i checked everything repeated the steps fuse was good etc etc. what could i of did wrong? btw my switch for fog lights lights up so i wouldnt think that the fuse for that is bad or anything
#28
i know this is from a while ago, but does anyone know if you can get a replacement relay?
i hosed down my engine bay yesterday and too much water got into the fuse and relay. the fog lights worked this morning when i dropped my fiance off at work and as i was driving to work i noticed they stopped working. the relay didnt click on and theres corrosion and rust all over the terminals.
i hosed down my engine bay yesterday and too much water got into the fuse and relay. the fog lights worked this morning when i dropped my fiance off at work and as i was driving to work i noticed they stopped working. the relay didnt click on and theres corrosion and rust all over the terminals.
#29
Do you tap into both the BLACK AND BLUE wires the ones connected to the side marker ??
i m using the second method (without poking the fire wall) !!
My main point is that i installed em and checked everything... and the fogs arent working !
i m using the second method (without poking the fire wall) !!
My main point is that i installed em and checked everything... and the fogs arent working !
Last edited by raymaster13; Aug 9, 2012 at 02:38 PM.
#30
hi
hi i just ordered those ebay foglights for my lancer, there's a few questions i wanted to ask... such as where should i plug the relay and fuse for the foglights? and will they still work even though i didnt plug the relay and fuse? im kinda new here so im still clueless hope that some1 would help me out....