Diy: Side skirt
#1
Newbie
Thread Starter
Diy: Side skirt
So i was at Home Depot today looking for a mesh vent and i came across
a rain gutter.http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053
I turned it to the side and thought it could be a side skirt.
So i bought it right away and got to work.
Materials: 2x Rain Gutter
Dremel
Measuring tape
Tape
imagination
Step 1. Cut measurements of the length of ur side skirt to match the bottom of ur car.
Step2. I Taped it first to measure up the slots that's going to fit into the car.
http://img.photobucket.com/albums/v4...g?t=1276181827
Step3. Trim off anything to fit into place.
I Still got to get some brackets to hold everything properly in place.
Also fill in the front to put the bracket..
other than that it should turn out like this.
a rain gutter.http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053
I turned it to the side and thought it could be a side skirt.
So i bought it right away and got to work.
Materials: 2x Rain Gutter
Dremel
Measuring tape
Tape
imagination
Step 1. Cut measurements of the length of ur side skirt to match the bottom of ur car.
Step2. I Taped it first to measure up the slots that's going to fit into the car.
http://img.photobucket.com/albums/v4...g?t=1276181827
Step3. Trim off anything to fit into place.
I Still got to get some brackets to hold everything properly in place.
Also fill in the front to put the bracket..
other than that it should turn out like this.
Thread
Thread Starter
Forum
Replies
Last Post
jermz1
09+ Ralliart How-To/Installations
2
May 13, 2015 07:38 PM