Hi Guys,

Im a newbie here and I don't know where I'm gonna post this things.. But I hope someone can give a feedback.. My car is Lancer GLXI 97 model and I made some modification on my car. I replaced my stock engine with 6A13TT / automatic tranmission.. I really like the performance but there are few things to be change like my brakes..

First issue, how can I resolve my ventilation/high temp since its too crowded to add fan or change my fan to EVO III. Everytime I turn on my air-con my temp gauge will increase because possible cause is the temp meter detect the heat of the engine since my car is lack of ventilation. I installed 2 fans with 1 row radiator. I can't upgrade my radiator to 2 rows since there's no room for that...

below's the image of my engine bay,



Second issue, after replacing my engine I encounter now my neutral sensor on dash board is blinking. I ask some technicians that my tranny possible is lacking of ATF so I already tried to add 3 Liters of ATF then when I used my car and try to run about 90 speed, my neutral again is blinking and my car's acceleration is gradually slow to 60 speed.. I ask some knows about my smartbox, they said that my smartbox turn to safe-mode just to protect my transmission. But, I already add 3 Liters of ATF is there other reason why my smartbox turn to safe-mode if I reach 90+ speed and gradually slow into 60 speed.

I hope someone can give some advise.. My apologies if I post it on a wrong section... Thanks.....

Misery