my photoshopped picture of what projectors should look like...maybe...let me know what u think
<chris>

 

is that the cwest kit?

 

oh yeah lights look good

 

Hey, it's some sorta of new Ralliart Body kit we're trying to get a group buy on.look up the Ralliart Front BUmper thread/posts
<chris>

 

it really compliments the ralliart grille

 

here's something to **** you guys off a bit or jealous? whichever...

i know its a small image but you can clearly see his projectors...and these were the only pictures i've found of the guys headlights.

 

damn! what more can you ask for JDM headlights and they are projectors!!!


Now before you guys get all crazy and start asking me a million questions.

I was lurking the net for JDM parts and found a Cedia with projector headlights...but its a custom setup that the owner made...there was no write up but the guy did briefly explain how the guy made them.


Cibie makes a fiberglass 3 projector headlight set which the owner of this vehicle use to have he then decided to go back to his stock headlights but instead painted the housing black and took the middle projector off the Cibie headlight set and grafted it into his stock JDM headlights!

here's a picture of the Cibie projector headlights.

 

are these type of lights out for our car yet? and if so where can u buy them?

 

now from my knowledge from owning JDM headlights or DEPO TDM headlights hehe is that the turn signal takes up 1/4 of the main headlight beam so in order for you guys to do the same i would recommend using the DEPO/JDM headlights as well since the Cibie projector seems to fit perfect...if you were to use the stock USDM headlights the projector off the Cibie headlights will look too small.

now its up to you to decide is it worth doing? also for another heads up just from eyeballing the size of the projector this guy used i can guarantee you that you can get the projector off the GS300s or any luxury vehicle with small projectors. cut the projector housing out along with the wires and such and graft it onto your stock headlights with JB Weld splice the projector wires up into your old stock headlights or install HIDs.

 

i hate to be an *** but please read the posts...

 

oh well apparently this guy wasn't the first to do it.


sorry no write up or detailed description of how they made these...it seems like this headlight uses a different projector this one has a silver plastic rim around the lens...the one on the blue cedia has a all chrome housing with a chrome ring around it.

 

another shot... you can see the ring is alot bigger than the one on the blue cedia...you can also see where they cut the housing to slide in the projector.

 

eh i dont feel like reading threw 11 pages, maybe someone wil not be an *** and give me a strait answer

 

actually the answers were clearly hinted on my last 4 posts and the last two pages as well...

but to save you the trouble no...no one has made any for mass production and there are none planned to be made for mass production.

 

ahhh damn that sucks! oh well