Hey guys I was browsing the forge website and I notice they have an aftermarket front motor mount of the evo 8. Just by the looks of the picture it looks like it might be interchangable with our lancers. Can anyone confirm, or am I was off base.
here is the link
http://www.forgemotorsport.co.uk/con...=FMPFF44%20106

 

the price is in pounds... so you need to convert then, international shipping... i would say skip that and get one from deyme(sp?) racing, which are the ppl that make RRMs and you dont have to pay RRMs mark up

 

Click on the US flag on the right and you will get a lower conversion rate into US $$

http://www.forgemotorsport.com/conte...=FMPFF44%20106

we ship and supply from our USA sales office in Orlando Florida

 

^+1
Forge, do you know if they fit the 02-03 lancers?

 

i'll check tomorrow. i happen to have a evo and a lancer motormount in my garage. hahaha.

(of course, the evo isn't mine )

 

I'm 99% sure it's the same. I think Mitsubishi has been using the same front motor mount design for almost 10 years now on most of its 4cyl cars.

 

That makes me a happy man. Kris can you verify this.

 

Just go to a Mitsubishi parts site and cross reference part numbers.

 

the part numbers don't match.

EVO - MR594455

Lancer -
MR554244 5MT
MR333578 Auto

Ralliart - MN184251

 

Ah, oh well. If anyone has a spare, take a look. The difference may not even be fitment. I've seen front motor mounts from as far back as 2g DSM's, and they looked spot-on identical. If I knew anyone who still had one I'd bug him for a comparison.

 

dag nabit! By the way, what the hell are you doing up?

 

I'll wait until rhyzin checks it. If that isn't possible I guess I can just grab one of those and check myself (for the community). I pmed the the vendor so we'll have to see

 

haha. speaking of which, me and my roommates just filled a 2G GSX front motor mount. they made too much urethane so i filled the spare lancer one i had. they're not similar.

that picture in the link up there definately looks similar to the lancer. if the circumference of the bushing and centering of the bolt hole in the middle are the same, then this product should work since the all that needs to be done is to replace the rubbery middle part.

 

Final papers. 8-10 more pages by 8:45ish.

 

Just FYI the one I was referring to was a GS or RS with the 420A.