How long have you had it in for? Has any of it dried up and cracked or fallen out? What about vibrations?

 

I filled my mounts with urethane and no signs of damage or cracks.
It's has almost been a year since I did this.

 

I filled my mounts with urethane and no signs of damage or cracks.
It's has almost been a year since I did this.

 

What type? Windo-weld? 80 spec, 94 spec? thanks

 

Sorry for the late reply. This was filled with 80a urethane.
Bought it at MCcarmaster (sp!)

Mixed and filled it accordingly and let it sit for 2 days before installing.


heres a picture

wet


Dried

 

Nice... know the part number?
http://www.mcmaster.com/

 

Is it just me or are they off center?

 

Bought urethane from www.mcmaster.com part # 8644K11

 

How does the car idle and such with the 80a?

 

I would say a slight noticeable vibration when idle in an automatic.
Barely any vibration when in neutral.
Vibration goes away when you drive.

Also mounts I shown you guys are for a mirage.

 

Im not sure if the mirage one fits the Lancers in the USA, but if it does just use some ralliart front and rear bush and get them pressed in the original housing. If you guys are interested i can supply some part numbers to help you get the part.