Hey everyone I am Paul. I reciently moved to Aberdeen Proving Grounds MD for military duty. I will be here for 15 weeks (Warrant Training). It would be great to get away on a weekend and meet some of the locals.

Also, if anyone near here needs assistance on a clutch, I have replaced 7 in various evos. I was the local Cincinnati expert so to speak. Myself and a helper can get the clutch done in about 4 hours with only hand tools.

Let me know.

Paul

 

want to dropby at our mini meet on sat at white marsh (honeygo blvd.)

 

welcome to the area. Join up at www.dcevoclub.com too! We meet up all the time, especially as the weather's getting warmer.

 

Whitemarsh is a whopping 20 min drive south from aberdeen proving ground. Right off of 95. You should definitely come hang out with us while we have a mini meet this saturday.

 

I need to replace my clutch...I can help you. lol

Welcome...be their sat. white marsh.

 

Welcome

 

Welcome to the area. You should come by the White Marsh mini meet and meet a few of the local car guys.

 

the white marsh meet is this saturday? as in two days from now?

and welcome to the area paul. are you at the APG in aberdeen or edgewood?

 

I am at Edgewood for now. They will be moving me to APG when rooms come available.

Please post directions. I will be there. From what I can see the weather is supposed to be good too.

Paul

 

I need my clutch put it next week when i get back to the states from Korea. I'll be at Andrews....

 

Take I-95 south to exit 67b. Take a right at the first light and then get in the left lane. You will see Ikea and a huge lot across from it. That is the White Marsh park and ride.

 

Kurt, you dont make any rights at the light.

Take 95 south for about 12 miles and get off on 67B which is whitemarsh blvd going west. Its the first of the two whitemarsh exits. Be in the far left lane. You'll make a left at the light and you'll see the ikea. The park and ride is right on your right. Make an immediate right hand turn into it. The area is built around a large mall. Very easy to get to.

And yes, the meet is 2 days from now on saturday.

 

Ok What time is everyone going to meet? I will surely be there. I have a White 03 EVO with just about every bolt on available.

As for those who need the clutches, I only have the weekends off. The good thing is that because I am military we can take your car to the auto craft shop and use the lifts. So much easier let me tell you. SPEED looks like you are military too.

There are some things you will need. You will need to get a slide hammer for the stub shafts and a ft/lb torque wrench with a 32mm socket for the axle nuts. Also 3 qts of Syncromesh for the tranny and 1 qt 80w90 synthetic for the front diff. Some high temp grease is good for lubing the throw out bearing fork too. Lots of rags are a necessity as well. Hopefully you are replacing the flywheel too, other wise it will most likely have to be resurfaced. Thus you will need a machine shop.

 

Bring some of your decals. I would like a couple for the visors.

I am certain you will like the vinal eyebrows I made. Maybe you can take a look and start selling them too.

 

11-12