Guaging interest in MD Mitsu meet
Thread Starter
Newbie
Joined: Sep 2003
Posts: 0
Likes: 0
I'll call them first thing in the morning to see if we can get hooked up with a dealer kit before the 29th. That way we'll be able to tune if people would like.
Hill
Agile Automotive Performance
410-628-9099
Hill
Agile Automotive Performance
410-628-9099
Newbie
Joined: Sep 2003
Posts: 38
Likes: 0
From: lorton, Va
Re: Date
Originally posted by ScoobieSnack
The next open Saturday we have at Agile is November 29th. I know it's kinda far away but that should give us enough time to get the word out and for you to free up your schedules. We'll make sure to have some free food on hand like hotdogs, chips and drinks. When it gets a little closer to the 29th I'll put up a sign up so that we can make a list of who wants to get on the dyno. That way when people start showing up we'll have some order to the madness.
We are located on the off the north side of 695. Go around 695 East or West which ever is closer for you. Get off on I-83 North and go a few miles to Padonia Rd and exit heading east(go right). Go three lights up to Rt 45 York Rd and turn left. Go thru two lights then look to the left for the Speed Shop sign on the side of the road. We are set back off the raod in a green building with white doors. Look for the Good Fortune Chinese food joint right in front of our shop. They have a huge, square, yellow sign behind ours. If you're coming from the north just come down I 83 and get off at Padonia and make a left. Then follow the same way as above.
Hill
Agile Automotive Performance
hill@agileauto.com
PS I have emailed the local Evo club but have not gotten any word from them yet.
The next open Saturday we have at Agile is November 29th. I know it's kinda far away but that should give us enough time to get the word out and for you to free up your schedules. We'll make sure to have some free food on hand like hotdogs, chips and drinks. When it gets a little closer to the 29th I'll put up a sign up so that we can make a list of who wants to get on the dyno. That way when people start showing up we'll have some order to the madness.
We are located on the off the north side of 695. Go around 695 East or West which ever is closer for you. Get off on I-83 North and go a few miles to Padonia Rd and exit heading east(go right). Go three lights up to Rt 45 York Rd and turn left. Go thru two lights then look to the left for the Speed Shop sign on the side of the road. We are set back off the raod in a green building with white doors. Look for the Good Fortune Chinese food joint right in front of our shop. They have a huge, square, yellow sign behind ours. If you're coming from the north just come down I 83 and get off at Padonia and make a left. Then follow the same way as above.
Hill
Agile Automotive Performance
hill@agileauto.com
PS I have emailed the local Evo club but have not gotten any word from them yet.
Thread Starter
Newbie
Joined: Sep 2003
Posts: 0
Likes: 0
I spoke to Dynafash and they are willing to come down and do reflashes but we have to get at least 5 people who want a reflash. Also it won't be cheap. It will cost $539 for him to complete each car. If there is enough interest I'll try and get him to come down in the morning on the 29th so that we won't tie up the dyno for all the people that want just power runs. So the first person to do a reflash might have to be here around 9 or 10 AM. Lets see if we can get 5 people then I'll call Dynoflash again and set everything up to sure.
Hill
Agile Automotive Performance
Hill
Agile Automotive Performance
Last edited by ScoobieSnack; Oct 29, 2003 at 09:52 AM.
on dcevoclub.com
http://forums.dcevoclub.com/showthread.php?p=2130
we have started the confirmed dynoflash people.
only need 4 more !
http://forums.dcevoclub.com/showthread.php?p=2130
we have started the confirmed dynoflash people.
only need 4 more !
Please make sure if you're going to get the Dynoflash done, that you hop over to the DCevoclub link and post there that you are interested in getting the service! We need 2 more people!
Thanks!
Thanks!