Notices
Midwest Region Includes IA, IL, IN, MI, MN, MO, WI, OH.

***Official Ohio Chat Thread***

Thread Tools
 
Search this Thread
 
Old May 22, 2006 | 08:41 AM
  #946  
dadriva's Avatar
Evolved Member
iTrader: (5)
 
Joined: Mar 2005
Posts: 569
Likes: 0
From: OH
Originally Posted by LilJapnBoy
let's all stop talking the trash talk....and let the talking be done at the strip....
bobby can still bring the tacoma...i mean he's brought it to the last two meets....

I'm about ready to trash the stock clutch......I figure it's good for one or two pulls....

bruno, you're full of shizznit....show me an Evo w/ an S-AFC2 running those #s on Buschur's MD...

no Evo 8 is going to run 330+ w/o a new snail...and more than S-AFC2 for EM.
Good points, but our favorite egoist on the boards has a new snail also (18g) So, mods to mods you have to include an evo with a new hairdryer. Which would easily be in the 330 range on the infamous pride bustin' BR dyno. We'll all know in a month

Oh, and watch out for that Taco. It might suprise more than a few on the forums
Reply
Old May 22, 2006 | 08:43 AM
  #947  
Quack's Avatar
Newbie
 
Joined: Jan 2005
Posts: 29
Likes: 0
Originally Posted by LilJapnBoy

bruno, you're full of shizznit....show me an Evo w/ an S-AFC2 running those #s on Buschur's MD...

no Evo 8 is going to run 330+ w/o a new snail...and more than S-AFC2 for EM.
i didn't say it, he did
Reply
Old May 22, 2006 | 08:47 AM
  #948  
Quack's Avatar
Newbie
 
Joined: Jan 2005
Posts: 29
Likes: 0
Originally Posted by dadriva
Good points, but our favorite egoist on the boards has a new snail also (18g) So, mods to mods you have to include an evo with a new hairdryer. Which would easily be in the 330 range on the infamous pride bustin' BR dyno. We'll all know in a month

Oh, and watch out for that Taco. It might suprise more than a few on the forums
i hope you max out at 328 on pump

take into consideration of the initial vehicle cost too and the Evo has higher HP ratings than my lowly WRX. alsot take into acount that i have doubled the WHP of a stock WRX.
Reply
Old May 22, 2006 | 08:49 AM
  #949  
BBYBruno's Avatar
Evolved Member
iTrader: (11)
 
Joined: May 2002
Posts: 1,230
Likes: 0
From: Eastlake, OH
Originally Posted by LilJapnBoy
let's all stop talking the trash talk....and let the talking be done at the strip....
bobby can still bring the tacoma...i mean he's brought it to the last two meets....

I'm about ready to trash the stock clutch......I figure it's good for one or two pulls....

bruno, you're full of shizznit....show me an Evo w/ an S-AFC2 running those #s on Buschur's MD...

no Evo 8 is going to run 330+ w/o a new snail...and more than S-AFC2 for EM.
EVILutionVIII made those numbers on a Mustang Dyno, it's possible.

--->https://www.evolutionm.net/registry/...no.php?did=199

Last edited by BBYBruno; May 22, 2006 at 08:52 AM.
Reply
Old May 22, 2006 | 08:52 AM
  #950  
Quack's Avatar
Newbie
 
Joined: Jan 2005
Posts: 29
Likes: 0
Originally Posted by BBYBruno
EVILutionVIII made those numbers on a Mustang Dyno. It's possible.
for sake of argument, we are referring to Buschur's Mustang Dyno. as we don't know the calibration on the other dyno's. if that is the case, a stg2 STi put down +800whp on Buschur's (after playing with the drum weight calibration)

that was also on 91/100 octane. don't know wat the mix was, so it's invalid
Reply
Old May 22, 2006 | 08:53 AM
  #951  
LilJapnBoy's Avatar
Evolving Member
iTrader: (6)
 
Joined: Jun 2003
Posts: 339
Likes: 0
From: 216
buwahahah, that must be crank horsepower.....on 91 octane....good ol' Cali gas.
Reply
Old May 22, 2006 | 08:54 AM
  #952  
BBYBruno's Avatar
Evolved Member
iTrader: (11)
 
Joined: May 2002
Posts: 1,230
Likes: 0
From: Eastlake, OH
Wow can we please hop off Buschurs dyno for a minute. Yes we dont know the calibration but it's fairly close. It's still a Mustang Dyno, damn.

How can it be crank when he's on a dyno
Reply
Old May 22, 2006 | 08:55 AM
  #953  
dadriva's Avatar
Evolved Member
iTrader: (5)
 
Joined: Mar 2005
Posts: 569
Likes: 0
From: OH
Originally Posted by Quack
i hope you max out at 328 on pump

take into consideration of the initial vehicle cost too and the Evo has higher HP ratings than my lowly WRX. alsot take into acount that i have doubled the WHP of a stock WRX.
Let me re-iterate for you from one of my earlier posts:

I couldn't care less about the whole Evo vs. Subi deal and $$ spent and egos bruised. It's all fun to me.

I DON'T CARE.
Reply
Old May 22, 2006 | 08:57 AM
  #954  
Quack's Avatar
Newbie
 
Joined: Jan 2005
Posts: 29
Likes: 0
I <3 U guy's...i'm just bored today
Reply
Old May 22, 2006 | 08:58 AM
  #955  
Quack's Avatar
Newbie
 
Joined: Jan 2005
Posts: 29
Likes: 0
Originally Posted by BBYBruno
Wow can we please hop off Buschurs dyno for a minute. Yes we dont know the calibration but it's fairly close. It's still a Mustang Dyno, damn.

How can it be crank when he's on a dyno
because you can calibrate the dyno's to reflect different #'s.
Reply
Old May 22, 2006 | 08:58 AM
  #956  
dadriva's Avatar
Evolved Member
iTrader: (5)
 
Joined: Mar 2005
Posts: 569
Likes: 0
From: OH
^^ Don't you have some pictures to take or something
Reply
Old May 22, 2006 | 09:00 AM
  #957  
Quack's Avatar
Newbie
 
Joined: Jan 2005
Posts: 29
Likes: 0
i did all weekend.. got another Suicide Girls shoot in 2 weeks

and i already finished what i had to do for my day job at 9:30 this morning
Reply
Old May 22, 2006 | 09:00 AM
  #958  
BBYBruno's Avatar
Evolved Member
iTrader: (11)
 
Joined: May 2002
Posts: 1,230
Likes: 0
From: Eastlake, OH
Originally Posted by Quack
because you can calibrate the dyno's to reflect different #'s.

I dont care the guy made good power calibrated any way you want.
Reply
Old May 22, 2006 | 09:03 AM
  #959  
Quack's Avatar
Newbie
 
Joined: Jan 2005
Posts: 29
Likes: 0
eric is the one that brought up the CHP



Originally Posted by LilJapnBoy
buwahahah, that must be crank horsepower.....on 91 octane....good ol' Cali gas.
Reply
Old May 22, 2006 | 09:03 AM
  #960  
ny-quiL's Avatar
Account Disabled
iTrader: (5)
 
Joined: Jun 2004
Posts: 166
Likes: 0
From: clevo
whoa whoa....All this "I dont care" talk...just remember...

Reply



All times are GMT -7. The time now is 04:47 AM.