anyone who knows how to do this?

i just got my kit and have no idea how to install it. the how-to in the forum doesn't really help. if you have experience or know how to do it, please let me know! will pay you of course.

this is the kit i have:　
http://www.xenonlink.com/product_inf...products_id=99

thanks.

 

it's too easy to do.... all you need to do is connect all the wires together and put the bulb in the projector... the hardest part is where to put the ballasts...

 

oh yeah, i forgot... you have to remove your bumper to remove the headlights to get to the low beam bulbs. so this is the hardest part.

 

where did you put the ballasts?

 

Mounted to the frame rail. on driver side behind ACD pump and on passenger side on frame rail behind oil cooler. you will have to take bumper skin off, but that is easy. I drilled a couple small holes for mounting on each rail. primed the holes and painted too. then used some self tapping screws. let me see if i can find the pics from mine.

 

pics would be helpful. thanks!

 

Here they come.

 

 

That should help. dont touch the bulbs what ever you do with your fingers.

 

ok, that means i have to go buy a drill. i hope that place on the frame rail isn't too hard to access. did u have to move anything to get there?

this is very helpful. thanks a lot!

 

you have to drop the oil cooler out of the way to mount them, but otherwise its pretty easy. good luck.

 

Cleanest place to mount them is actually ON the headlamp (on the belly side like OEM fitment -there is even a nice spot meant for HID ballasts). This is how I installed my HID's on my RS.

 

luckily for me, i was able to use the stock ballasts and just change the bulbs !!...

you can let them dangle for now and find a spot later or zip tie it somewhere.

 

Dude cmon dangle??? Seriously?

 

how did you secure it?