EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo X Engine Management / Tuning Forums Discuss the major engine management systems.

Anyone know the locations of the intake air temp sensors?

Thread Tools
 
Search this Thread
 
Old Jan 11, 2009 | 02:06 AM
Share
  #1  
madcows's Avatar
madcows
Thread Starter
Evolved Member
 
Joined: Dec 2008
Posts: 662
Likes: 0
From: michigan
Anyone know the locations of the intake air temp sensors?
The pinout diagram of the ECU indicates that there are two intake air temp sensors. Can anyone tell me their locations?

.. I might be on to something here.
Reply
0
Old Jan 11, 2009 | 02:38 AM
Share
  #2  
SiC's Avatar
SiC
Evolved Member
iTrader: (1)
 
Joined: Jun 2008
Posts: 1,018
Likes: 0
From: Kanagawa, Japan
Originally Posted by madcows
The pinout diagram of the ECU indicates that there are two intake air temp sensors. Can anyone tell me their locations?

.. I might be on to something here.
The only one I know of is located near the MAP sensor.
Reply
0
Old Jan 11, 2009 | 10:52 AM
Share
  #3  
madcows's Avatar
madcows
Thread Starter
Evolved Member
 
Joined: Dec 2008
Posts: 662
Likes: 0
From: michigan
Originally Posted by SiC
The only one I know of is located near the MAP sensor.
I had a feeling there would be one on the plenum. Can anyone else check near the MAF sensor? How many wires are coming off the MAF?
Reply
0
Old Jan 12, 2009 | 05:01 PM
Share
  #4  
mrfred's Avatar
mrfred
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Originally Posted by madcows
I had a feeling there would be one on the plenum. Can anyone else check near the MAF sensor? How many wires are coming off the MAF?
The other one is in the MAF. Easiest way to verify is to look at the FSM.
Reply
0
Old Jan 12, 2009 | 06:12 PM
Share
  #5  
madcows's Avatar
madcows
Thread Starter
Evolved Member
 
Joined: Dec 2008
Posts: 662
Likes: 0
From: michigan
Originally Posted by mrfred
The other one is in the MAF. Easiest way to verify is to look at the FSM.
I figured one would certainly be around the intake, it was the one on manifold that I was uncertain about.
Reply
0
Old Jan 12, 2009 | 07:29 PM
Share
  #6  
mrfred's Avatar
mrfred
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Originally Posted by madcows
I figured one would certainly be around the intake, it was the one on manifold that I was uncertain about.
It seemed that you asked in your previous post if anyone knew whether there was a temp sensor in the MAF.
Reply
0
Old Jan 12, 2009 | 08:33 PM
Share
  #7  
madcows's Avatar
madcows
Thread Starter
Evolved Member
 
Joined: Dec 2008
Posts: 662
Likes: 0
From: michigan
Originally Posted by mrfred
It seemed that you asked in your previous post if anyone knew whether there was a temp sensor in the MAF.
Oops.. right... At any rate, I didn't know for certain. Just had some thoughts sloshing around in my head. I'll be getting a ralliart soon, so I wanted to know what I'm working with. Thanks for the response.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fuel Trims no work, out of ideas, any thoughts?
Raceghost
ECU Flash
16
Dec 15, 2016 02:54 PM
IAT location and issue.
UnholyMaggot
04-06 Ralliart Engine/Drivetrain
1
Jun 6, 2016 08:55 AM
US Instructions for Power FC D-Jetro
GTVEVO
General Engine Management / Tuning Forum
17
Oct 5, 2004 07:20 AM
Where do you plumb in the Air Temp Sensor.
TearItUpSports
AEM EMS
9
Aug 3, 2004 06:19 AM
water temp sensor voltage scale?
D1_EVO8
AEM EMS
5
Jun 20, 2004 02:37 PM
Tags
Back to Subforum
Evo X Engine Management / Tuning Forums
View Next Unread
anyone have a picture of the MAT sensor tip?




Advanced Search

All times are GMT -7. The time now is 01:31 PM.